radix dec ; Code bank 0; Start address: 0; End address: 4095 org 0 ; Define start addresses for data regions shared___globals equ 112 globals___0 equ 32 globals___1 equ 160 globals___2 equ 288 globals___3 equ 416 __indf equ 0 __pcl equ 2 __status equ 3 __fsr equ 4 __c___byte equ 3 __c___bit equ 0 __z___byte equ 3 __z___bit equ 2 __rp0___byte equ 3 __rp0___bit equ 5 __rp1___byte equ 3 __rp1___bit equ 6 __irp___byte equ 3 __irp___bit equ 7 __pclath equ 10 __cb0___byte equ 10 __cb0___bit equ 3 __cb1___byte equ 10 __cb1___bit equ 4 ; # Copyright (c) 2000-2005 by Wayne C. Gramlich and Bill Benson ; # All rights reserved. ; buffer = 'led10' ; line_number = 6 ; library _robobricks_pic16f688 entered ; # Copyright (c) 2000-2005 by Wayne C. Gramlich and Bill Benson ; # All rights reserved. ; buffer = '_robobricks_pic16f688' ; line_number = 6 ; library _pic16f688 entered ; # Copyright (c) 2004 by Wayne C. Gramlich ; # All rights reserved. ; buffer = '_pic16f688' ; line_number = 5 ; processor pic16f688 ; line_number = 6 ; configure_address 0x2007 ; line_number = 7 ; configure_fill 0x3000 ; line_number = 8 ; configure_option fcmen: on = 0x800 ; line_number = 9 ; configure_option fcmen: off = 0x000 ; line_number = 10 ; configure_option ieso: on = 0x400 ; line_number = 11 ; configure_option ieso: off = 0x000 ; line_number = 12 ; configure_option boden: on = 0x300 ; line_number = 13 ; configure_option boden: partial = 0x200 ; line_number = 14 ; configure_option boden: sboden = 0x100 ; line_number = 15 ; configure_option boden: off = 0x000 ; line_number = 16 ; configure_option cpd: on = 0x00 ; line_number = 17 ; configure_option cpd: off = 0x80 ; line_number = 18 ; configure_option cp: on = 0x00 ; line_number = 19 ; configure_option cp: off = 0x40 ; line_number = 20 ; configure_option mclre: on = 0x20 ; line_number = 21 ; configure_option mclre: off = 0x20 ; line_number = 22 ; configure_option pwrte: on = 0x00 ; line_number = 23 ; configure_option pwrte: off = 0x10 ; line_number = 24 ; configure_option wdte: on = 8 ; line_number = 25 ; configure_option wdte: off = 0 ; line_number = 26 ; configure_option fosc: rc_clk = 7 ; line_number = 27 ; configure_option fosc: rc_no_clk = 6 ; line_number = 28 ; configure_option fosc: int_clk = 5 ; line_number = 29 ; configure_option fosc: int_no_clk = 4 ; line_number = 30 ; configure_option fosc: ec = 3 ; line_number = 31 ; configure_option fosc: hs = 2 ; line_number = 32 ; configure_option fosc: xt = 1 ; line_number = 33 ; configure_option fosc: lp = 0 ; line_number = 35 ; code_bank 0x0 : 0xfff ; line_number = 36 ; data_bank 0x0 : 0x7f ; line_number = 37 ; data_bank 0x80 : 0xff ; line_number = 38 ; data_bank 0x100 : 0x17f ; line_number = 39 ; data_bank 0x180 : 0x1ff ; line_number = 40 ; global_region 0x20 : 0x6f ; line_number = 41 ; global_region 0xa0 : 0xef ; line_number = 42 ; global_region 0x120 : 0x16f ; line_number = 43 ; global_region 0x1a0 : 0x1ef ; line_number = 44 ; shared_region 0x70 : 0x7f ; line_number = 45 ; interrupts_possible ; line_number = 46 ; packages pdip=14, soic=14, tssop=14 ; line_number = 47 ; pin vdd, power_supply ; line_number = 48 ; pin_bindings pdip=1, soic=1, tssop=1 ; line_number = 49 ; pin ra5_in, ra5_nc, ra5_out, t1cki, osc1, clkin ; line_number = 50 ; pin_bindings pdip=2, soic=2, tssop=2 ; line_number = 51 ; bind_to _porta@5 ; line_number = 52 ; or_if ra5_in _trisa 32 ; line_number = 53 ; or_if ra5_nc _trisa 32 ; line_number = 54 ; or_if ra5_out _trisa 0 ; line_number = 55 ; pin ra4_in, ra4_nc, ra4_out, t1g, osc2, an3, clkout ; line_number = 56 ; pin_bindings pdip=3, soic=3, tssop=3 ; line_number = 57 ; bind_to _porta@4 ; line_number = 58 ; or_if ra4_in _trisa 16 ; line_number = 59 ; or_if ra4_nc _trisa 16 ; line_number = 60 ; or_if ra4_out _trisa 0 ; line_number = 61 ; or_if an3 _trisa 8 ; line_number = 62 ; or_if ra4_in _ansel 0 ; line_number = 63 ; or_if ra4_out _ansel 0 ; line_number = 64 ; or_if an3 _ansel 8 ; line_number = 65 ; or_if ra4_in _adcon0 0 ; line_number = 66 ; or_if ra4_out _adcon0 0 ; line_number = 67 ; or_if an3 _adcon0 1 ; line_number = 68 ; pin ra3_in, ra3_nc, mclr, vpp ; line_number = 69 ; pin_bindings pdip=4, soic=4, tssop=4 ; line_number = 70 ; bind_to _porta@4 ; line_number = 71 ; or_if ra3_in _trisa 8 ; line_number = 72 ; or_if ra3_nc _trisa 8 ; line_number = 73 ; pin rc5_in, rc5_nc, rc5_out, rx, dt ; line_number = 74 ; pin_bindings pdip=5, soic=5, tssop=5 ; line_number = 75 ; bind_to _portc@5 ; line_number = 76 ; or_if rc5_in _trisc 32 ; line_number = 77 ; or_if rc5_nc _trisc 32 ; line_number = 78 ; or_if rc5_out _trisc 0 ; line_number = 79 ; or_if rx _trisc 32 ; line_number = 80 ; pin rc4_in, rc4_nc, rc4_out, c2out, tx, ck ; line_number = 81 ; pin_bindings pdip=6, soic=6, tssop=6 ; line_number = 82 ; bind_to _portc@4 ; line_number = 83 ; or_if rc4_in _trisc 16 ; line_number = 84 ; or_if rc4_nc _trisc 16 ; line_number = 85 ; or_if rc4_out _trisc 0 ; # The UART documentation says TX must be marked as in input: ; line_number = 87 ; or_if tx _trisc 16 ; line_number = 88 ; pin rc3_in, rc3_nc, rc3_out, an7 ; line_number = 89 ; pin_bindings pdip=7, soic=7, tssop=7 ; line_number = 90 ; bind_to _portc@3 ; line_number = 91 ; or_if rc3_in _trisc 8 ; line_number = 92 ; or_if rc3_nc _trisc 8 ; line_number = 93 ; or_if rc3_out _trisc 0 ; line_number = 94 ; or_if an7 _trisc 8 ; line_number = 95 ; or_if rc3_in _ansel 0 ; line_number = 96 ; or_if rc3_out _ansel 0 ; line_number = 97 ; or_if an7 _ansel 128 ; line_number = 98 ; or_if rc3_in _adcon0 0 ; line_number = 99 ; or_if rc3_out _adcon0 0 ; line_number = 100 ; or_if an7 _adcon0 1 ; line_number = 101 ; pin rc2_in, rc2_nc, rc2_out, an6 ; line_number = 102 ; pin_bindings pdip=8, soic=8, tssop=8 ; line_number = 103 ; bind_to _portc@2 ; line_number = 104 ; or_if rc2_in _trisc 4 ; line_number = 105 ; or_if rc2_nc _trisc 4 ; line_number = 106 ; or_if rc2_out _trisc 0 ; line_number = 107 ; or_if an6 _trisc 4 ; line_number = 108 ; or_if rc2_in _ansel 0 ; line_number = 109 ; or_if rc2_out _ansel 0 ; line_number = 110 ; or_if an6 _ansel 64 ; line_number = 111 ; or_if rc2_in _adcon0 0 ; line_number = 112 ; or_if rc2_out _adcon0 0 ; line_number = 113 ; or_if an6 _adcon0 1 ; line_number = 114 ; pin rc1_in, rc1_nc, rc1_out, an5, c2in_minus ; line_number = 115 ; pin_bindings pdip=9, soic=9, tssop=9 ; line_number = 116 ; bind_to _portc@1 ; line_number = 117 ; or_if rc1_in _trisc 2 ; line_number = 118 ; or_if rc1_nc _trisc 2 ; line_number = 119 ; or_if rc1_out _trisc 0 ; line_number = 120 ; or_if rc1_in _cmcon0 7 ; line_number = 121 ; or_if rc1_out _cmcon0 7 ; line_number = 122 ; or_if an5 _trisc 2 ; line_number = 123 ; or_if rc1_in _ansel 0 ; line_number = 124 ; or_if rc1_out _ansel 0 ; line_number = 125 ; or_if an5 _ansel 32 ; line_number = 126 ; or_if rc1_in _adcon0 0 ; line_number = 127 ; or_if rc1_out _adcon0 0 ; line_number = 128 ; or_if an5 _adcon0 1 ; line_number = 129 ; pin rc0_in, rc0_nc, rc0_out, an4, c2in_plus ; line_number = 130 ; pin_bindings pdip=10, soic=10, tssop=10 ; line_number = 131 ; bind_to _portc@0 ; line_number = 132 ; or_if rc0_in _trisc 1 ; line_number = 133 ; or_if rc0_nc _trisc 1 ; line_number = 134 ; or_if rc0_out _trisc 0 ; line_number = 135 ; or_if rc0_in _cmcon0 7 ; line_number = 136 ; or_if rc0_out _cmcon0 7 ; line_number = 137 ; or_if an4 _trisc 1 ; line_number = 138 ; or_if rc0_in _ansel 0 ; line_number = 139 ; or_if rc0_out _ansel 0 ; line_number = 140 ; or_if an4 _ansel 16 ; line_number = 141 ; or_if rc0_in _adcon0 0 ; line_number = 142 ; or_if rc0_out _adcon0 0 ; line_number = 143 ; or_if an4 _adcon0 1 ; line_number = 144 ; pin ra2_in, ra2_nc, ra2_out, an2, c1out, t0cki, int ; line_number = 145 ; pin_bindings pdip=11, soic=11, tssop=11 ; line_number = 146 ; bind_to _porta@2 ; line_number = 147 ; or_if ra2_in _trisa 4 ; line_number = 148 ; or_if ra2_nc _trisa 4 ; line_number = 149 ; or_if ra2_out _trisa 0 ; line_number = 150 ; or_if an2 _trisa 4 ; line_number = 151 ; or_if ra2_in _ansel 0 ; line_number = 152 ; or_if ra2_out _ansel 0 ; line_number = 153 ; or_if an2 _ansel 4 ; line_number = 154 ; or_if ra2_in _adcon0 0 ; line_number = 155 ; or_if ra2_out _adcon0 0 ; line_number = 156 ; or_if an2 _adcon0 1 ; line_number = 157 ; pin ra1_in, ra1_nc, ra1_out, an1, c1in_minus, vref, icspclk ; line_number = 158 ; pin_bindings pdip=12, soic=12, tssop=12 ; line_number = 159 ; bind_to _porta@1 ; line_number = 160 ; or_if ra1_in _trisa 2 ; line_number = 161 ; or_if ra1_nc _trisa 2 ; line_number = 162 ; or_if ra1_out _trisa 0 ; line_number = 163 ; or_if ra1_in _cmcon0 7 ; line_number = 164 ; or_if ra1_out _cmcon0 7 ; line_number = 165 ; or_if an1 _trisa 2 ; line_number = 166 ; or_if ra1_in _ansel 0 ; line_number = 167 ; or_if ra1_out _ansel 0 ; line_number = 168 ; or_if an1 _ansel 2 ; line_number = 169 ; or_if ra1_in _adcon0 0 ; line_number = 170 ; or_if ra1_out _adcon0 0 ; line_number = 171 ; or_if an1 _adcon0 1 ; line_number = 172 ; pin ra0_in, ra0_nc, ra0_out, an0, c1in_plus, icspdat, ulpwu ; line_number = 173 ; pin_bindings pdip=13, soic=13, tssop=13 ; line_number = 174 ; bind_to _porta@0 ; line_number = 175 ; or_if ra0_in _trisa 1 ; line_number = 176 ; or_if ra0_nc _trisa 1 ; line_number = 177 ; or_if ra0_out _trisa 0 ; line_number = 178 ; or_if ra0_in _cmcon0 7 ; line_number = 179 ; or_if ra0_out _cmcon0 7 ; line_number = 180 ; or_if an0 _trisa 1 ; line_number = 181 ; or_if ra0_in _ansel 0 ; line_number = 182 ; or_if ra0_out _ansel 0 ; line_number = 183 ; or_if an0 _ansel 1 ; line_number = 184 ; or_if ra0_in _adcon0 0 ; line_number = 185 ; or_if ra0_out _adcon0 0 ; line_number = 186 ; or_if an0 _adcon0 1 ; line_number = 187 ; pin vss, ground ; line_number = 188 ; pin_bindings pdip=14, soic=14, tssop=14 ; # Register/bit bindings: ; # Databank 0 (0x0 - 0x7f): ; line_number = 197 ; register _indf = _indf equ 0 ; line_number = 199 ; register _tmr0 = _tmr0 equ 1 ; line_number = 201 ; register _pcl = _pcl equ 2 ; line_number = 203 ; register _status = _status equ 3 ; line_number = 204 ; bind _irp = _status@7 _irp___byte equ _status _irp___bit equ 7 ; line_number = 205 ; bind _rp1 = _status@5 _rp1___byte equ _status _rp1___bit equ 5 ; line_number = 206 ; bind _rp0 = _status@5 _rp0___byte equ _status _rp0___bit equ 5 ; line_number = 207 ; bind _to = _status@4 _to___byte equ _status _to___bit equ 4 ; line_number = 208 ; bind _pd = _status@3 _pd___byte equ _status _pd___bit equ 3 ; line_number = 209 ; bind _z = _status@2 _z___byte equ _status _z___bit equ 2 ; line_number = 210 ; bind _dc = _status@1 _dc___byte equ _status _dc___bit equ 1 ; line_number = 211 ; bind _c = _status@0 _c___byte equ _status _c___bit equ 0 ; line_number = 213 ; register _fsr = _fsr equ 4 ; line_number = 215 ; register _porta = _porta equ 5 ; line_number = 216 ; register _ra = _ra equ 5 ; line_number = 217 ; bind _ra5 = _porta@5 _ra5___byte equ _porta _ra5___bit equ 5 ; line_number = 218 ; bind _ra4 = _porta@4 _ra4___byte equ _porta _ra4___bit equ 4 ; line_number = 219 ; bind _ra3 = _porta@3 _ra3___byte equ _porta _ra3___bit equ 3 ; line_number = 220 ; bind _ra2 = _porta@2 _ra2___byte equ _porta _ra2___bit equ 2 ; line_number = 221 ; bind _ra1 = _porta@1 _ra1___byte equ _porta _ra1___bit equ 1 ; line_number = 222 ; bind _ra0 = _porta@0 _ra0___byte equ _porta _ra0___bit equ 0 ; line_number = 224 ; register _portc = _portc equ 7 ; line_number = 225 ; register _rc = _rc equ 7 ; line_number = 226 ; bind _rc5 = _portc@5 _rc5___byte equ _portc _rc5___bit equ 5 ; line_number = 227 ; bind _rc4 = _portc@4 _rc4___byte equ _portc _rc4___bit equ 4 ; line_number = 228 ; bind _rc3 = _portc@3 _rc3___byte equ _portc _rc3___bit equ 3 ; line_number = 229 ; bind _rc2 = _portc@2 _rc2___byte equ _portc _rc2___bit equ 2 ; line_number = 230 ; bind _rc1 = _portc@1 _rc1___byte equ _portc _rc1___bit equ 1 ; line_number = 231 ; bind _rc0 = _portc@0 _rc0___byte equ _portc _rc0___bit equ 0 ; line_number = 233 ; register _pclath = _pclath equ 10 ; line_number = 235 ; register _intcon = _intcon equ 11 ; line_number = 236 ; bind _gie = _intcon@7 _gie___byte equ _intcon _gie___bit equ 7 ; line_number = 237 ; bind _peie = _intcon@6 _peie___byte equ _intcon _peie___bit equ 6 ; line_number = 238 ; bind _t0ie = _intcon@5 _t0ie___byte equ _intcon _t0ie___bit equ 5 ; line_number = 239 ; bind _inte = _intcon@4 _inte___byte equ _intcon _inte___bit equ 4 ; line_number = 240 ; bind _raie = _intcon@3 _raie___byte equ _intcon _raie___bit equ 3 ; line_number = 241 ; bind _t0if = _intcon@2 _t0if___byte equ _intcon _t0if___bit equ 2 ; line_number = 242 ; bind _intf = _intcon@1 _intf___byte equ _intcon _intf___bit equ 1 ; line_number = 243 ; bind _raif = _intcon@0 _raif___byte equ _intcon _raif___bit equ 0 ; line_number = 245 ; register _pir1 = _pir1 equ 12 ; line_number = 246 ; bind _eeif = _pir1@7 _eeif___byte equ _pir1 _eeif___bit equ 7 ; line_number = 247 ; bind _adif = _pir1@6 _adif___byte equ _pir1 _adif___bit equ 6 ; line_number = 248 ; bind _rcif = _pir1@5 _rcif___byte equ _pir1 _rcif___bit equ 5 ; line_number = 249 ; bind _c2if = _pir1@4 _c2if___byte equ _pir1 _c2if___bit equ 4 ; line_number = 250 ; bind _c1if = _pir1@3 _c1if___byte equ _pir1 _c1if___bit equ 3 ; line_number = 251 ; bind _osfif = _pir1@2 _osfif___byte equ _pir1 _osfif___bit equ 2 ; line_number = 252 ; bind _txif = _pir1@1 _txif___byte equ _pir1 _txif___bit equ 1 ; line_number = 253 ; bind _tmr1if = _pir1@0 _tmr1if___byte equ _pir1 _tmr1if___bit equ 0 ; line_number = 255 ; register _tmr1l = _tmr1l equ 14 ; line_number = 257 ; register _tmr1h = _tmr1h equ 15 ; line_number = 259 ; register _t1con = _t1con equ 16 ; line_number = 260 ; bind t1ginv = _t1con@7 t1ginv___byte equ _t1con t1ginv___bit equ 7 ; line_number = 261 ; bind _tmr1ge = _t1con@6 _tmr1ge___byte equ _t1con _tmr1ge___bit equ 6 ; line_number = 262 ; bind _t1ckps1 = _t1con@5 _t1ckps1___byte equ _t1con _t1ckps1___bit equ 5 ; line_number = 263 ; bind _t1ckps0 = _t1con@4 _t1ckps0___byte equ _t1con _t1ckps0___bit equ 4 ; line_number = 264 ; bind _t1oscen = _t1con@3 _t1oscen___byte equ _t1con _t1oscen___bit equ 3 ; line_number = 265 ; bind _t1sync = _t1con@2 _t1sync___byte equ _t1con _t1sync___bit equ 2 ; line_number = 266 ; bind _tmr1cs = _t1con@1 _tmr1cs___byte equ _t1con _tmr1cs___bit equ 1 ; line_number = 267 ; bind _tmr1on = _t1con@0 _tmr1on___byte equ _t1con _tmr1on___bit equ 0 ; line_number = 269 ; register _baudctl = _baudctl equ 17 ; line_number = 270 ; bind _abdovf = _baudctl@7 _abdovf___byte equ _baudctl _abdovf___bit equ 7 ; line_number = 271 ; bind _rcidl = _baudctl@6 _rcidl___byte equ _baudctl _rcidl___bit equ 6 ; line_number = 272 ; bind _sckp = _baudctl@4 _sckp___byte equ _baudctl _sckp___bit equ 4 ; line_number = 273 ; bind _brg16 = _baudctl@3 _brg16___byte equ _baudctl _brg16___bit equ 3 ; line_number = 274 ; bind _wue = _baudctl@1 _wue___byte equ _baudctl _wue___bit equ 1 ; line_number = 275 ; bind _abden = _baudctl@0 _abden___byte equ _baudctl _abden___bit equ 0 ; line_number = 277 ; register _spbrgh = _spbrgh equ 18 ; line_number = 279 ; register _spbrg = _spbrg equ 19 ; line_number = 281 ; register _rcreg = _rcreg equ 20 ; line_number = 283 ; register _txreg = _txreg equ 21 ; line_number = 285 ; register _txsta = _txsta equ 22 ; line_number = 286 ; bind _csrc = _txsta@7 _csrc___byte equ _txsta _csrc___bit equ 7 ; line_number = 287 ; bind _tx9 = _txsta@6 _tx9___byte equ _txsta _tx9___bit equ 6 ; line_number = 288 ; bind _txen = _txsta@5 _txen___byte equ _txsta _txen___bit equ 5 ; line_number = 289 ; bind _sync = _txsta@4 _sync___byte equ _txsta _sync___bit equ 4 ; line_number = 290 ; bind _sendb = _txsta@3 _sendb___byte equ _txsta _sendb___bit equ 3 ; line_number = 291 ; bind _brgh = _txsta@2 _brgh___byte equ _txsta _brgh___bit equ 2 ; line_number = 292 ; bind _trmt = _txsta@1 _trmt___byte equ _txsta _trmt___bit equ 1 ; line_number = 293 ; bind _tx9d = _txsta@7 _tx9d___byte equ _txsta _tx9d___bit equ 7 ; line_number = 295 ; register _rcsta = _rcsta equ 23 ; line_number = 296 ; bind _spen = _rcsta@7 _spen___byte equ _rcsta _spen___bit equ 7 ; line_number = 297 ; bind _rx9 = _rcsta@6 _rx9___byte equ _rcsta _rx9___bit equ 6 ; line_number = 298 ; bind _sren = _rcsta@5 _sren___byte equ _rcsta _sren___bit equ 5 ; line_number = 299 ; bind _cren = _rcsta@4 _cren___byte equ _rcsta _cren___bit equ 4 ; line_number = 300 ; bind _adden = _rcsta@3 _adden___byte equ _rcsta _adden___bit equ 3 ; line_number = 301 ; bind _ferr = _rcsta@2 _ferr___byte equ _rcsta _ferr___bit equ 2 ; line_number = 302 ; bind _oerr = _rcsta@1 _oerr___byte equ _rcsta _oerr___bit equ 1 ; line_number = 303 ; bind _rx9d = _rcsta@0 _rx9d___byte equ _rcsta _rx9d___bit equ 0 ; line_number = 305 ; register _wdtcon = _wdtcon equ 24 ; line_number = 306 ; bind _wdtps3 = _wdtcon@4 _wdtps3___byte equ _wdtcon _wdtps3___bit equ 4 ; line_number = 307 ; bind _wdtps2 = _wdtcon@3 _wdtps2___byte equ _wdtcon _wdtps2___bit equ 3 ; line_number = 308 ; bind _wdtps1 = _wdtcon@2 _wdtps1___byte equ _wdtcon _wdtps1___bit equ 2 ; line_number = 309 ; bind _wdtps0 = _wdtcon@1 _wdtps0___byte equ _wdtcon _wdtps0___bit equ 1 ; line_number = 310 ; bind _swdten = _wdtcon@0 _swdten___byte equ _wdtcon _swdten___bit equ 0 ; line_number = 312 ; register _cmcon0 = _cmcon0 equ 25 ; line_number = 313 ; bind _c1out = _cmcon0@7 _c1out___byte equ _cmcon0 _c1out___bit equ 7 ; line_number = 314 ; bind _c2out = _cmcon0@6 _c2out___byte equ _cmcon0 _c2out___bit equ 6 ; line_number = 315 ; bind _c1inv = _cmcon0@5 _c1inv___byte equ _cmcon0 _c1inv___bit equ 5 ; line_number = 316 ; bind _c2inv = _cmcon0@4 _c2inv___byte equ _cmcon0 _c2inv___bit equ 4 ; line_number = 317 ; bind _cis = _cmcon0@3 _cis___byte equ _cmcon0 _cis___bit equ 3 ; line_number = 318 ; bind _cm2 = _cmcon0@2 _cm2___byte equ _cmcon0 _cm2___bit equ 2 ; line_number = 319 ; bind _cm1 = _cmcon0@1 _cm1___byte equ _cmcon0 _cm1___bit equ 1 ; line_number = 320 ; bind _cm0 = _cmcon0@0 _cm0___byte equ _cmcon0 _cm0___bit equ 0 ; line_number = 322 ; register _cmcon1 = _cmcon1 equ 26 ; line_number = 323 ; bind _t1gss = _cmcon1@0 _t1gss___byte equ _cmcon1 _t1gss___bit equ 0 ; line_number = 324 ; bind _c2sync = _cmcon1@1 _c2sync___byte equ _cmcon1 _c2sync___bit equ 1 ; line_number = 326 ; register _adresh = _adresh equ 30 ; line_number = 328 ; register _adcon0 = _adcon0 equ 31 ; line_number = 329 ; bind _adfm = _adcon0@7 _adfm___byte equ _adcon0 _adfm___bit equ 7 ; line_number = 330 ; bind _vcfg = _adcon0@6 _vcfg___byte equ _adcon0 _vcfg___bit equ 6 ; line_number = 331 ; bind _chs2 = _adcon0@4 _chs2___byte equ _adcon0 _chs2___bit equ 4 ; line_number = 332 ; bind _chs1 = _adcon0@3 _chs1___byte equ _adcon0 _chs1___bit equ 3 ; line_number = 333 ; bind _chs0 = _adcon0@2 _chs0___byte equ _adcon0 _chs0___bit equ 2 ; line_number = 334 ; bind _go = _adcon0@1 _go___byte equ _adcon0 _go___bit equ 1 ; line_number = 335 ; bind _adon = _adcon0@0 _adon___byte equ _adcon0 _adon___bit equ 0 ; # Data bank 1 (0x80-0xff): ; line_number = 339 ; register _option_reg = _option_reg equ 129 ; line_number = 340 ; bind _rapu = _option_reg@7 _rapu___byte equ _option_reg _rapu___bit equ 7 ; line_number = 341 ; bind _intedg = _option_reg@6 _intedg___byte equ _option_reg _intedg___bit equ 6 ; line_number = 342 ; bind _t0cs = _option_reg@5 _t0cs___byte equ _option_reg _t0cs___bit equ 5 ; line_number = 343 ; bind _t0se = _option_reg@4 _t0se___byte equ _option_reg _t0se___bit equ 4 ; line_number = 344 ; bind _psa = _option_reg@3 _psa___byte equ _option_reg _psa___bit equ 3 ; line_number = 345 ; bind _ps2 = _option_reg@2 _ps2___byte equ _option_reg _ps2___bit equ 2 ; line_number = 346 ; bind _ps1 = _option_reg@1 _ps1___byte equ _option_reg _ps1___bit equ 1 ; line_number = 347 ; bind _ps0 = _option_reg@0 _ps0___byte equ _option_reg _ps0___bit equ 0 ; line_number = 349 ; register _trisa = _trisa equ 133 ; line_number = 350 ; bind _trisa5 = _trisa@5 _trisa5___byte equ _trisa _trisa5___bit equ 5 ; line_number = 351 ; bind _trisa4 = _trisa@4 _trisa4___byte equ _trisa _trisa4___bit equ 4 ; line_number = 352 ; bind _trisa3 = _trisa@3 _trisa3___byte equ _trisa _trisa3___bit equ 3 ; line_number = 353 ; bind _trisa2 = _trisa@2 _trisa2___byte equ _trisa _trisa2___bit equ 2 ; line_number = 354 ; bind _trisa1 = _trisa@1 _trisa1___byte equ _trisa _trisa1___bit equ 1 ; line_number = 355 ; bind _trisa0 = _trisa@0 _trisa0___byte equ _trisa _trisa0___bit equ 0 ; line_number = 357 ; register _trisc = _trisc equ 135 ; line_number = 358 ; bind _trisc5 = _trisc@5 _trisc5___byte equ _trisc _trisc5___bit equ 5 ; line_number = 359 ; bind _trisc4 = _trisc@4 _trisc4___byte equ _trisc _trisc4___bit equ 4 ; line_number = 360 ; bind _trisc3 = _trisc@3 _trisc3___byte equ _trisc _trisc3___bit equ 3 ; line_number = 361 ; bind _trisc2 = _trisc@2 _trisc2___byte equ _trisc _trisc2___bit equ 2 ; line_number = 362 ; bind _trisc1 = _trisc@1 _trisc1___byte equ _trisc _trisc1___bit equ 1 ; line_number = 363 ; bind _trisc0 = _trisc@0 _trisc0___byte equ _trisc _trisc0___bit equ 0 ; line_number = 365 ; register _pie1 = _pie1 equ 140 ; line_number = 366 ; bind _eeie = _pie1@7 _eeie___byte equ _pie1 _eeie___bit equ 7 ; line_number = 367 ; bind _adie = _pie1@6 _adie___byte equ _pie1 _adie___bit equ 6 ; line_number = 368 ; bind _rcie = _pie1@5 _rcie___byte equ _pie1 _rcie___bit equ 5 ; line_number = 369 ; bind _c2ie = _pie1@4 _c2ie___byte equ _pie1 _c2ie___bit equ 4 ; line_number = 370 ; bind _c1ie = _pie1@3 _c1ie___byte equ _pie1 _c1ie___bit equ 3 ; line_number = 371 ; bind _osfie = _pie1@2 _osfie___byte equ _pie1 _osfie___bit equ 2 ; line_number = 372 ; bind _txie = _pie1@1 _txie___byte equ _pie1 _txie___bit equ 1 ; line_number = 373 ; bind _tmr1ie = _pie1@0 _tmr1ie___byte equ _pie1 _tmr1ie___bit equ 0 ; line_number = 375 ; register _pcon = _pcon equ 142 ; line_number = 376 ; bind _ulpwue = _pcon@5 _ulpwue___byte equ _pcon _ulpwue___bit equ 5 ; line_number = 377 ; bind _sboden = _pcon@4 _sboden___byte equ _pcon _sboden___bit equ 4 ; line_number = 378 ; bind _por = _pcon@1 _por___byte equ _pcon _por___bit equ 1 ; line_number = 379 ; bind _bod = _pcon@0 _bod___byte equ _pcon _bod___bit equ 0 ; line_number = 381 ; register _osccon = _osccon equ 143 ; line_number = 382 ; bind _ircf2 = _osccon@6 _ircf2___byte equ _osccon _ircf2___bit equ 6 ; line_number = 383 ; bind _ircf1 = _osccon@5 _ircf1___byte equ _osccon _ircf1___bit equ 5 ; line_number = 384 ; bind _ircf0 = _osccon@4 _ircf0___byte equ _osccon _ircf0___bit equ 4 ; line_number = 385 ; bind _osts = _osccon@3 _osts___byte equ _osccon _osts___bit equ 3 ; line_number = 386 ; bind _hts = _osccon@2 _hts___byte equ _osccon _hts___bit equ 2 ; line_number = 387 ; bind _lts = _osccon@3 _lts___byte equ _osccon _lts___bit equ 3 ; line_number = 388 ; bind _scs = _osccon@2 _scs___byte equ _osccon _scs___bit equ 2 ; line_number = 390 ; register _osctune = _osctune equ 144 ; line_number = 391 ; bind _tun4 = _osctune@4 _tun4___byte equ _osctune _tun4___bit equ 4 ; line_number = 392 ; bind _tun3 = _osctune@3 _tun3___byte equ _osctune _tun3___bit equ 3 ; line_number = 393 ; bind _tun2 = _osctune@2 _tun2___byte equ _osctune _tun2___bit equ 2 ; line_number = 394 ; bind _tun1 = _osctune@1 _tun1___byte equ _osctune _tun1___bit equ 1 ; line_number = 395 ; bind _tun0 = _osctune@0 _tun0___byte equ _osctune _tun0___bit equ 0 ; line_number = 396 ; constant _osccal_lsb = 1 _osccal_lsb equ 1 ; line_number = 398 ; register _ansel = _ansel equ 145 ; line_number = 399 ; bind _ans7 = _ansel@7 _ans7___byte equ _ansel _ans7___bit equ 7 ; line_number = 400 ; bind _ans6 = _ansel@6 _ans6___byte equ _ansel _ans6___bit equ 6 ; line_number = 401 ; bind _ans5 = _ansel@5 _ans5___byte equ _ansel _ans5___bit equ 5 ; line_number = 402 ; bind _ans4 = _ansel@4 _ans4___byte equ _ansel _ans4___bit equ 4 ; line_number = 403 ; bind _ans3 = _ansel@3 _ans3___byte equ _ansel _ans3___bit equ 3 ; line_number = 404 ; bind _ans2 = _ansel@2 _ans2___byte equ _ansel _ans2___bit equ 2 ; line_number = 405 ; bind _ans1 = _ansel@1 _ans1___byte equ _ansel _ans1___bit equ 1 ; line_number = 406 ; bind _ans0 = _ansel@0 _ans0___byte equ _ansel _ans0___bit equ 0 ; line_number = 408 ; register _wpua = _wpua equ 149 ; line_number = 409 ; bind _wpua5 = _wpua@5 _wpua5___byte equ _wpua _wpua5___bit equ 5 ; line_number = 410 ; bind _wpua4 = _wpua@4 _wpua4___byte equ _wpua _wpua4___bit equ 4 ; line_number = 411 ; bind _wpua2 = _wpua@2 _wpua2___byte equ _wpua _wpua2___bit equ 2 ; line_number = 412 ; bind _wpua1 = _wpua@1 _wpua1___byte equ _wpua _wpua1___bit equ 1 ; line_number = 413 ; bind _wpua0 = _wpua@0 _wpua0___byte equ _wpua _wpua0___bit equ 0 ; line_number = 415 ; register _ioca = _ioca equ 150 ; line_number = 416 ; bind _ioca5 = _ioca@5 _ioca5___byte equ _ioca _ioca5___bit equ 5 ; line_number = 417 ; bind _ioca4 = _ioca@4 _ioca4___byte equ _ioca _ioca4___bit equ 4 ; line_number = 418 ; bind _ioca3 = _ioca@3 _ioca3___byte equ _ioca _ioca3___bit equ 3 ; line_number = 419 ; bind _ioca2 = _ioca@2 _ioca2___byte equ _ioca _ioca2___bit equ 2 ; line_number = 420 ; bind _ioca1 = _ioca@1 _ioca1___byte equ _ioca _ioca1___bit equ 1 ; line_number = 421 ; bind _ioca0 = _ioca@0 _ioca0___byte equ _ioca _ioca0___bit equ 0 ; line_number = 423 ; register _eedath = _eedath equ 151 ; line_number = 425 ; register _eeadrh = _eeadrh equ 152 ; line_number = 427 ; register _vrcon = _vrcon equ 153 ; line_number = 428 ; bind _vren = _vrcon@7 _vren___byte equ _vrcon _vren___bit equ 7 ; line_number = 429 ; bind _vrr = _vrcon@5 _vrr___byte equ _vrcon _vrr___bit equ 5 ; line_number = 430 ; bind _vr3 = _vrcon@3 _vr3___byte equ _vrcon _vr3___bit equ 3 ; line_number = 431 ; bind _vr2 = _vrcon@2 _vr2___byte equ _vrcon _vr2___bit equ 2 ; line_number = 432 ; bind _vr1 = _vrcon@1 _vr1___byte equ _vrcon _vr1___bit equ 1 ; line_number = 433 ; bind _vr0 = _vrcon@0 _vr0___byte equ _vrcon _vr0___bit equ 0 ; line_number = 435 ; register _eedata = _eedata equ 154 ; line_number = 436 ; bind _eedat7 = _eedata@7 _eedat7___byte equ _eedata _eedat7___bit equ 7 ; line_number = 437 ; bind _eedat6 = _eedata@6 _eedat6___byte equ _eedata _eedat6___bit equ 6 ; line_number = 438 ; bind _eedat5 = _eedata@5 _eedat5___byte equ _eedata _eedat5___bit equ 5 ; line_number = 439 ; bind _eedat4 = _eedata@4 _eedat4___byte equ _eedata _eedat4___bit equ 4 ; line_number = 440 ; bind _eedat3 = _eedata@3 _eedat3___byte equ _eedata _eedat3___bit equ 3 ; line_number = 441 ; bind _eedat2 = _eedata@2 _eedat2___byte equ _eedata _eedat2___bit equ 2 ; line_number = 442 ; bind _eedat1 = _eedata@1 _eedat1___byte equ _eedata _eedat1___bit equ 1 ; line_number = 443 ; bind _eedat0 = _eedata@0 _eedat0___byte equ _eedata _eedat0___bit equ 0 ; line_number = 445 ; register _eeadr = _eeadr equ 155 ; line_number = 446 ; bind _eeadr7 = _eeadr@7 _eeadr7___byte equ _eeadr _eeadr7___bit equ 7 ; line_number = 447 ; bind _eeadr6 = _eeadr@6 _eeadr6___byte equ _eeadr _eeadr6___bit equ 6 ; line_number = 448 ; bind _eeadr5 = _eeadr@5 _eeadr5___byte equ _eeadr _eeadr5___bit equ 5 ; line_number = 449 ; bind _eeadr4 = _eeadr@4 _eeadr4___byte equ _eeadr _eeadr4___bit equ 4 ; line_number = 450 ; bind _eeadr3 = _eeadr@3 _eeadr3___byte equ _eeadr _eeadr3___bit equ 3 ; line_number = 451 ; bind _eeadr2 = _eeadr@2 _eeadr2___byte equ _eeadr _eeadr2___bit equ 2 ; line_number = 452 ; bind _eeadr1 = _eeadr@1 _eeadr1___byte equ _eeadr _eeadr1___bit equ 1 ; line_number = 453 ; bind _eeadr0 = _eeadr@0 _eeadr0___byte equ _eeadr _eeadr0___bit equ 0 ; line_number = 455 ; register _eecon1 = _eecon1 equ 156 ; line_number = 456 ; bind _eepgd = _eecon1@7 _eepgd___byte equ _eecon1 _eepgd___bit equ 7 ; line_number = 457 ; bind _wrerr = _eecon1@3 _wrerr___byte equ _eecon1 _wrerr___bit equ 3 ; line_number = 458 ; bind _wren = _eecon1@2 _wren___byte equ _eecon1 _wren___bit equ 2 ; line_number = 459 ; bind _wr = _eecon1@1 _wr___byte equ _eecon1 _wr___bit equ 1 ; line_number = 460 ; bind _rd = _eecon1@0 _rd___byte equ _eecon1 _rd___bit equ 0 ; line_number = 462 ; register _eecon2 = _eecon2 equ 157 ; line_number = 464 ; register _adresl = _adresl equ 158 ; line_number = 466 ; register _adcon1 = _adcon1 equ 159 ; line_number = 467 ; bind _adcs2 = _adcon1@6 _adcs2___byte equ _adcon1 _adcs2___bit equ 6 ; line_number = 468 ; bind _adcs1 = _adcon1@5 _adcs1___byte equ _adcon1 _adcs1___bit equ 5 ; line_number = 469 ; bind _adcs0 = _adcon1@4 _adcs0___byte equ _adcon1 _adcs0___bit equ 4 ; # Data Bank 2 (0x100 - 0x17f): ; buffer = '_robobricks_pic16f688' ; line_number = 6 ; library _pic16f688 exited ; line_number = 7 ; library clock8mhz entered ; # Copyright (c) 2004-2005 by Wayne C. Gramlich ; # All rights reserved. ; # This library defines the contstants {clock_rate}, {instruction_rate}, ; # and {clocks_per_instruction}. ; # Define processor constants: ; buffer = 'clock8mhz' ; line_number = 9 ; constant clock_rate = 8000000 clock_rate equ 8000000 ; line_number = 10 ; constant clocks_per_instruction = 4 clocks_per_instruction equ 4 ; line_number = 11 ; constant instruction_rate = clock_rate / clocks_per_instruction instruction_rate equ 2000000 ; buffer = '_robobricks_pic16f688' ; line_number = 7 ; library clock8mhz exited ; # Get some EUSART constants defined: ; line_number = 10 ; constant _eusart_clock = clock_rate _eusart_clock equ 8000000 ; line_number = 11 ; constant _eusart_factor = 4 _eusart_factor equ 4 ; line_number = 12 ; library _eusart entered ; # Copyright (c) 2005 by Wayne C. Gramlich ; # All rights reserved. ; # This library contains a bunch of definitions for the Enhanced Universal ; # Asynchronous Serial Receiver/Transmitter (EUSART) that is available ; # on many of the PIC microcontrollers. ; # In order to use this module you have to get two constants defined ; # BEFORE including this library -- {_eusart_factor} and {_eusart_clock}. ; # {_eusart_clock} should be set to the frequency oscillator for the chip. ; # {_eusart_factor} should be set to 4, 16, or 64 depending upon whether ; # the {_brg16} and {_brgh} bits are set. Use the table below to select: ; # ; # _{brg16} {_brgh} _{eusart_factor} ; # 0 0 64 ; # 0 1 16 ; # 1 0 16 ; # 1 1 ; # 2400 baud: ; buffer = '_eusart' ; line_number = 23 ; constant _eusart_2400 = (_eusart_clock / (2400 * _eusart_factor)) - 1 _eusart_2400 equ 832 ; line_number = 24 ; constant _eusart_2400_low = _eusart_2400 & 0xff _eusart_2400_low equ 64 ; line_number = 25 ; constant _eusart_2400_high = _eusart_2400 >> 8 _eusart_2400_high equ 3 ; line_number = 26 ; constant _eusart_2400_index = 0 _eusart_2400_index equ 0 ; # 4800 baud: ; line_number = 28 ; constant _eusart_4800 = (_eusart_clock / (4800 * _eusart_factor)) - 1 _eusart_4800 equ 415 ; line_number = 29 ; constant _eusart_4800_low = _eusart_4800 & 0xff _eusart_4800_low equ 159 ; line_number = 30 ; constant _eusart_4800_high = _eusart_4800 >> 8 _eusart_4800_high equ 1 ; line_number = 31 ; constant _eusart_4800_index = 1 _eusart_4800_index equ 1 ; # 9600 baud: ; line_number = 33 ; constant _eusart_9600 = (_eusart_clock / (9600 * _eusart_factor)) - 1 _eusart_9600 equ 207 ; line_number = 34 ; constant _eusart_9600_low = _eusart_9600 & 0xff _eusart_9600_low equ 207 ; line_number = 35 ; constant _eusart_9600_high = _eusart_9600 >> 8 _eusart_9600_high equ 0 ; line_number = 36 ; constant _eusart_9600_index = 2 _eusart_9600_index equ 2 ; # 19200 baud: ; line_number = 38 ; constant _eusart_19200 = (_eusart_clock / (19200 * _eusart_factor)) - 1 _eusart_19200 equ 103 ; line_number = 39 ; constant _eusart_19200_low = _eusart_19200 & 0xff _eusart_19200_low equ 103 ; line_number = 40 ; constant _eusart_19200_high = _eusart_19200 >> 8 _eusart_19200_high equ 0 ; line_number = 41 ; constant _eusart_19200_index = 3 _eusart_19200_index equ 3 ; # 38400 baud: ; line_number = 43 ; constant _eusart_38400 = (_eusart_clock / (38400 * _eusart_factor)) - 1 _eusart_38400 equ 51 ; line_number = 44 ; constant _eusart_38400_low = _eusart_38400 & 0xff _eusart_38400_low equ 51 ; line_number = 45 ; constant _eusart_38400_high = _eusart_38400 >> 8 _eusart_38400_high equ 0 ; line_number = 46 ; constant _eusart_38400_index = 4 _eusart_38400_index equ 4 ; # 57600 baud: ; line_number = 48 ; constant _eusart_57600 = (_eusart_clock / (57600 * _eusart_factor)) - 1 _eusart_57600 equ 33 ; line_number = 49 ; constant _eusart_57600_low = _eusart_57600 & 0xff _eusart_57600_low equ 33 ; line_number = 50 ; constant _eusart_57600_high = _eusart_57600 >> 8 _eusart_57600_high equ 0 ; line_number = 51 ; constant _eusart_57600_index = 5 _eusart_57600_index equ 5 ; # 115200 baud: ; line_number = 53 ; constant _eusart_115200 = (_eusart_clock / (115200 * _eusart_factor)) - 1 _eusart_115200 equ 16 ; line_number = 54 ; constant _eusart_115200_low = _eusart_115200 & 0xff _eusart_115200_low equ 16 ; line_number = 55 ; constant _eusart_115200_high = _eusart_115200 >> 8 _eusart_115200_high equ 0 ; line_number = 56 ; constant _eusart_115200_index = 6 _eusart_115200_index equ 6 ; # 203400 baud: ; line_number = 58 ; constant _eusart_203400 = (_eusart_clock / (203400 * _eusart_factor)) - 1 _eusart_203400 equ 8 ; line_number = 59 ; constant _eusart_203400_low = _eusart_203400 & 0xff _eusart_203400_low equ 8 ; line_number = 60 ; constant _eusart_203400_high = _eusart_203400 >> 8 _eusart_203400_high equ 0 ; line_number = 61 ; constant _eusart_203400_index = 7 _eusart_203400_index equ 7 ; buffer = '_robobricks_pic16f688' ; line_number = 12 ; library _eusart exited ; line_number = 14 ; global debug_mode bit debug_mode___byte equ globals___0+79 debug_mode___bit equ 0 ; line_number = 15 ; global in_byte_get bit in_byte_get___byte equ globals___0+79 in_byte_get___bit equ 1 ; Delaying code generation for procedure byte_get ; Delaying code generation for procedure byte_put ; Delaying code generation for procedure baud_rate_low ; Delaying code generation for procedure baud_rate_high ; buffer = 'led10' ; line_number = 6 ; library _robobricks_pic16f688 exited ; line_number = 8 ; package pdip ; line_number = 9 ; pin 1 = power_supply ; line_number = 10 ; pin 2 = ra5_in, name = debug debug___byte equ _porta debug___bit equ 5 ; line_number = 11 ; pin 3 = ra4_out, name = nc1 nc1___byte equ _porta nc1___bit equ 4 ; line_number = 12 ; pin 4 = ra3_nc, name = nc2 nc2___byte equ _porta nc2___bit equ 4 ; line_number = 13 ; pin 5 = rx, name = serial_in serial_in___byte equ _portc serial_in___bit equ 5 ; line_number = 14 ; pin 6 = tx, name = serial_out serial_out___byte equ _portc serial_out___bit equ 4 ; line_number = 15 ; pin 7 = rc3_out, name = row1 row1___byte equ _portc row1___bit equ 3 ; line_number = 16 ; pin 8 = rc2_out, name = row2 row2___byte equ _portc row2___bit equ 2 ; line_number = 17 ; pin 9 = rc1_out, name = row0 row0___byte equ _portc row0___bit equ 1 ; line_number = 18 ; pin 10 = rc0_out, name = col0 col0___byte equ _portc col0___bit equ 0 ; line_number = 19 ; pin 11 = ra2_out, name = col1 col1___byte equ _porta col1___bit equ 2 ; line_number = 20 ; pin 12 = ra1_out, name = col2 col2___byte equ _porta col2___bit equ 1 ; line_number = 21 ; pin 13 = ra0_out, name = col3 col3___byte equ _porta col3___bit equ 0 ; line_number = 22 ; pin 14 = ground ; line_number = 23 ; bind tris_debug = _trisa5 tris_debug___byte equ _trisa tris_debug___bit equ 5 ; line_number = 25 ; constant leds_count = 10 leds_count equ 10 ; line_number = 27 ; constant states_size = 6 states_size equ 6 ; line_number = 28 ; constant states_size2 = states_size << 1 states_size2 equ 12 ; line_number = 29 ; global states[states_size] array[byte] states equ globals___0+3 ; line_number = 30 ; bind command_previous = states[0] command_previous equ globals___0+3 ; line_number = 31 ; bind command_last = states[1] command_last equ globals___0+4 ; line_number = 32 ; bind sent_last = states[2] sent_last equ globals___0+5 ; line_number = 33 ; bind sent_previous = states[3] sent_previous equ globals___0+6 ; line_number = 34 ; bind leds_mask_high = states[4] leds_mask_high equ globals___0+7 ; line_number = 35 ; bind leds_mask_low = states[5] leds_mask_low equ globals___0+8 ; line_number = 36 ; global blink_masks[leds_count] array[byte] blink_masks equ globals___0+9 ; line_number = 37 ; global row byte row equ globals___0+19 ; line_number = 38 ; global baud_rate_current byte baud_rate_current equ globals___0+20 ; line_number = 40 ; constant baud_rate = 2400 baud_rate equ 2400 ; line_number = 41 ; constant instructions_per_bit = instruction_rate / baud_rate instructions_per_bit equ 833 ; line_number = 42 ; constant delays_per_bit = 3 delays_per_bit equ 3 ; line_number = 43 ; constant instructions_per_delay = instructions_per_bit / delays_per_bit instructions_per_delay equ 277 ; line_number = 44 ; constant extra_instructions = 5 extra_instructions equ 5 ; line_number = 45 ; constant delay_instructions = instructions_per_delay - extra_instructions delay_instructions equ 272 ; line_number = 47 ; global state_index byte state_index equ globals___0+21 ; line_number = 49 ; procedure main main: ; Initialize some registers clrf _adcon0 bsf __rp0___byte, __rp0___bit clrf _ansel movlw 7 bcf __rp0___byte, __rp0___bit movwf _cmcon0 movlw 40 bsf __rp0___byte, __rp0___bit movwf _trisa movlw 48 movwf _trisc ; arguments_none ; line_number = 51 ; returns_nothing ; line_number = 53 ; local ledx byte main__ledx equ globals___0+22 ; line_number = 54 ; local data byte main__data equ globals___0+23 ; line_number = 55 ; local glitch byte main__glitch equ globals___0+24 ; line_number = 56 ; local index byte main__index equ globals___0+25 ; line_number = 57 ; local mask byte main__mask equ globals___0+26 ; line_number = 58 ; local rate byte main__rate equ globals___0+27 ; line_number = 59 ; local result byte main__result equ globals___0+28 ; line_number = 60 ; local temp byte main__temp equ globals___0+29 ; line_number = 61 ; local previous_spbrg byte main__previous_spbrg equ globals___0+30 ; line_number = 62 ; local previous_spbrgh byte main__previous_spbrgh equ globals___0+31 ; # Switch over to 8MHz: ; before procedure statements delay=non-uniform, bit states=(data:00=>01 code:XX=>XX) ; line_number = 65 ; _osccon := 0x71 movlw 113 movwf _osccon ; # Warm up the UART: ; line_number = 68 ; _txsta := 0x24 movlw 36 bcf __rp0___byte, __rp0___bit movwf _txsta ; line_number = 69 ; _rcsta := 0x90 movlw 144 movwf _rcsta ; line_number = 70 ; _baudctl := 0x08 movlw 8 movwf _baudctl ; line_number = 71 ; _spbrg := _eusart_2400_low movlw 64 movwf _spbrg ; line_number = 72 ; _spbrgh := _eusart_2400_high movlw 3 movwf _spbrgh ; line_number = 73 ; baud_rate_current := _eusart_2400_index clrf baud_rate_current ; # Warm up Timer 0: ; line_number = 76 ; _psa := 0 bsf __rp0___byte, __rp0___bit bcf _psa___byte, _psa___bit ; line_number = 77 ; _t0cs := 0 bcf _t0cs___byte, _t0cs___bit ; line_number = 78 ; _ps0 := 0 bcf _ps0___byte, _ps0___bit ; line_number = 79 ; _ps1 := 0 bcf _ps1___byte, _ps1___bit ; line_number = 80 ; _ps2 := 0 bcf _ps2___byte, _ps2___bit ; line_number = 82 ; nc1 := 0 bcf __rp0___byte, __rp0___bit bcf nc1___byte, nc1___bit ; line_number = 83 ; debug_mode := 0 bcf debug_mode___byte, debug_mode___bit ; line_number = 84 ; if !debug start ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size=0 && false.size>1 ; bit_code_emit_helper1: body_code.size=5 true_test=false body_code.delay=0 (non-uniform delay) btfsc debug___byte, debug___bit goto main__1 ; line_number = 85 ; debug_mode := 1 bsf debug_mode___byte, debug_mode___bit ; line_number = 86 ; tris_debug := 0 bsf __rp0___byte, __rp0___bit bcf tris_debug___byte, tris_debug___bit ; line_number = 87 ; debug := 0 bcf __rp0___byte, __rp0___bit bcf debug___byte, debug___bit main__1: ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=debug (data:00=>00 code:XX=>XX) ; line_number = 84 ; if !debug done ; # Initialize blink_masks: ; line_number = 90 ; index := 0 movlw 0 movwf main__index ; line_number = 91 ; loop_exactly leds_count start main__2 equ globals___0+38 movlw 10 movwf main__2 main__3: ; line_number = 92 ; blink_masks[index - 1] := 0xff ; index_fsr_first decf main__index,w addlw blink_masks movwf __fsr movlw 255 movwf __indf ; line_number = 93 ; index := index + 1 incf main__index,f ; line_number = 91 ; loop_exactly leds_count wrap-up decfsz main__2,f goto main__3 ; line_number = 91 ; loop_exactly leds_count done ; # Initialize remaining registers: ; line_number = 96 ; state_index := 0 movlw 0 movwf state_index ; line_number = 97 ; glitch := 0 movlw 0 movwf main__glitch ; line_number = 98 ; index := 0 movlw 0 movwf main__index ; line_number = 99 ; leds_mask_low := 0x15 movlw 21 movwf leds_mask_low ; line_number = 100 ; leds_mask_high := 0x2a movlw 42 movwf leds_mask_high ; line_number = 101 ; row := 0 movlw 0 movwf row ; # Process commands: ; line_number = 104 ; loop_forever start main__4: ; # Wait for command: ; line_number = 106 ; command_last := byte_get() call byte_get movwf command_last ; # Dispatch on command: ; line_number = 109 ; switch command_last >> 6 start movlw main__92>>8 movwf __pclath main__93 equ globals___0+38 swapf command_last,w movwf main__93 rrf main__93,f rrf main__93,w andlw 3 addlw main__92 movwf __pcl ; page_group 4 main__92: goto main__88 goto main__89 goto main__90 goto main__91 ; line_number = 111 ; case 0 main__88: ; # (Command = 00xx xxxx): ; line_number = 113 ; if command_last@5 start main__select__5___byte equ command_last main__select__5___bit equ 5 ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code_size > 1 && false_code_size > 1 ; true_code_size=3 false_code_size=2 btfss main__select__5___byte, main__select__5___bit goto main__6 ; # Write Upper (Command = 001a bcde): ; line_number = 115 ; leds_mask_high := command_last & 0x1f movlw 31 andwf command_last,w movwf leds_mask_high goto main__7 main__6: ; # Write Lower (Command = 000a bcde): ; line_number = 118 ; leds_mask_low := command_last movf command_last,w movwf leds_mask_low main__7: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=main__select__5 (data:00=>00 code:XX=>XX) ; line_number = 113 ; if command_last@5 done goto main__94 ; line_number = 120 ; case 1 main__89: ; # Bit commands:(Command = 01cc bbbb): ; line_number = 122 ; ledx := command_last & 0xf movlw 15 andwf command_last,w movwf main__ledx ; line_number = 123 ; data := leds_mask_low movf leds_mask_low,w movwf main__data ; line_number = 124 ; if ledx >= 5 start movlw 5 subwf main__ledx,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code.size = 0 && false_code.size > 1 ; bit_code_emit_helper1: body_code.size=4 true_test=true body_code.delay=0 (non-uniform delay) btfss __c___byte, __c___bit goto main__8 ; line_number = 125 ; ledx := ledx - 5 movlw 251 addwf main__ledx,f ; line_number = 126 ; data := leds_mask_high movf leds_mask_high,w movwf main__data ; Recombine size1 = 0 || size2 = 0 main__8: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__c (data:00=>00 code:XX=>XX) ; line_number = 124 ; if ledx >= 5 done ; # Compute the mask: ; line_number = 129 ; mask := 1 movlw 1 movwf main__mask ; line_number = 130 ; while ledx != 0 start main__9: ; Left minus Right movf main__ledx,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size=0 && false.size>1 ; bit_code_emit_helper1: body_code.size=4 true_test=false body_code.delay=0 (non-uniform delay) btfsc __z___byte, __z___bit goto main__10 ; line_number = 131 ; mask := mask << 1 ; Assignment of variable to self (no code needed) rlf main__mask,f bcf main__mask, 0 ; line_number = 132 ; ledx := ledx - 1 decf main__ledx,f goto main__9 main__10: ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:00=>00 code:XX=>XX) ; line_number = 130 ; while ledx != 0 done ; line_number = 134 ; ledx := command_last & 0xf movlw 15 andwf command_last,w movwf main__ledx ; line_number = 135 ; switch (command_last >> 4) & 3 start movlw main__15>>8 movwf __pclath main__16 equ globals___0+38 swapf command_last,w andlw 3 addlw main__15 movwf __pcl ; page_group 4 main__15: goto main__11 goto main__12 goto main__13 goto main__14 ; line_number = 136 ; case 0 main__11: ; # Bit Clear (Command = 0100 bbbb): ; line_number = 138 ; data := data & (0xff ^ mask) movlw 255 xorwf main__mask,w andwf main__data,f goto main__17 ; line_number = 139 ; case 1 main__12: ; # Bit Set (Command = 0100 bbbb): ; line_number = 141 ; data := data | mask movf main__mask,w iorwf main__data,f goto main__17 ; line_number = 142 ; case 2 main__13: ; # Bit Toggle (Command = 0100 bbbb): ; line_number = 144 ; data := data ^ mask movf main__mask,w xorwf main__data,f goto main__17 ; line_number = 145 ; case 3 main__14: ; # Bit Read (Command = 0100 bbbb): ; line_number = 147 ; result := (mask_to_bit(blink_masks[ledx]) ^ 7) << 5 movf main__ledx,w addlw blink_masks movwf __fsr movf __indf,w call mask_to_bit xorlw 7 movwf main__result swapf main__result,f rlf main__result,f movlw 224 andwf main__result,f ; line_number = 148 ; if data & mask != 0 start ; Left minus Right movf main__data,w andwf main__mask,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code.size=0 && false_code.size=1 btfss __z___byte, __z___bit ; line_number = 149 ; result := result + 1 incf main__result,f ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:00=>00 code:XX=>XX) ; line_number = 148 ; if data & mask != 0 done ; line_number = 150 ; call byte_put(result) movf main__result,w call byte_put main__17: ; switch end:(data:00=>00 code:XX=>XX) ; line_number = 135 ; switch (command_last >> 4) & 3 done ; # Stuff the data back: ; line_number = 153 ; if ledx < 5 start movlw 5 subwf main__ledx,w ; line_number = 156 ; leds_mask_high := data movf main__data,w ; line_number = 154 ; leds_mask_low := data ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_size=1 && false_size=1 ; SUBCASE: Double test; true, then false btfsc __c___byte, __c___bit movwf leds_mask_high btfss __c___byte, __c___bit movwf leds_mask_low ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__c (data:00=>00 code:XX=>XX) ; line_number = 153 ; if ledx < 5 done goto main__94 ; line_number = 157 ; case 2 main__90: ; # Do nothing (Command = 10xx xxx): ; line_number = 159 ; switch (command_last >> 4) & 3 start movlw main__60>>8 movwf __pclath main__61 equ globals___0+38 swapf command_last,w andlw 3 addlw main__60 movwf __pcl ; page_group 4 main__60: goto main__56 goto main__57 goto main__58 goto main__59 ; line_number = 160 ; case 0 main__56: ; # Command = 1000 xxxx: ; line_number = 162 ; switch (command_last >> 2) & 3 start movlw main__29>>8 movwf __pclath main__30 equ globals___0+38 rrf command_last,w movwf main__30 rrf main__30,w andlw 3 addlw main__29 movwf __pcl ; page_group 4 main__29: goto main__27 goto main__28 goto main__28 goto main__28 ; line_number = 163 ; case 0 main__27: ; # Command = 1000 00xx: ; line_number = 165 ; switch command_last & 3 start movlw main__25>>8 movwf __pclath movlw 3 andwf command_last,w addlw main__25 movwf __pcl ; page_group 4 main__25: goto main__21 goto main__22 goto main__23 goto main__24 ; line_number = 166 ; case 0 main__21: ; # Read All (Command = 1000 0000): ; line_number = 168 ; call byte_put(leds_mask_high) movf leds_mask_high,w call byte_put ; line_number = 169 ; call byte_put(leds_mask_low) movf leds_mask_low,w call byte_put goto main__26 ; line_number = 170 ; case 1 main__22: ; # Read Lower (Command = 1000 0001): ; line_number = 172 ; call byte_put(leds_mask_low) movf leds_mask_low,w call byte_put ; # xx = 10: read-all, lower, upper; ; # blink rate; inc/dec leds;pwr mode goto main__26 ; line_number = 175 ; case 2 main__23: ; # Read Upper (Command = 1000 0010): ; line_number = 177 ; call byte_put(leds_mask_high) movf leds_mask_high,w call byte_put goto main__26 ; line_number = 179 ; case 3 main__24: ; # Blink Rate Set (Command = 1000 0011): ; line_number = 181 ; command_last := byte_get() call byte_get movwf command_last ; line_number = 182 ; ledx := command_last & 0xf movlw 15 andwf command_last,w movwf main__ledx ; line_number = 183 ; if ledx >= 10 start movlw 10 subwf main__ledx,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code.size = 0 && false_code.size > 1 ; bit_code_emit_helper1: body_code.size=2 true_test=true body_code.delay=0 (non-uniform delay) btfss __c___byte, __c___bit goto main__18 ; line_number = 184 ; ledx := 0 movlw 0 movwf main__ledx ; Recombine size1 = 0 || size2 = 0 main__18: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__c (data:00=>00 code:XX=>XX) ; line_number = 183 ; if ledx >= 10 done ; line_number = 185 ; blink_masks[ledx] := bit_to_mask[command_last >> 5] ; right_temporary_first main__19 equ globals___0+38 main__20 equ globals___0+39 swapf command_last,w movwf main__20 rrf main__20,w andlw 7 call bit_to_mask movwf main__19 movf main__ledx,w addlw blink_masks movwf __fsr movf main__19,w movwf __indf main__26: ; switch end:(data:00=>00 code:XX=>XX) ; line_number = 165 ; switch command_last & 3 done goto main__31 ; line_number = 186 ; case 1, 2, 3 main__28: ; line_number = 187 ; do_nothing main__31: ; switch end:(data:00=>?? code:XX=>XX) ; line_number = 162 ; switch (command_last >> 2) & 3 done goto main__62 ; line_number = 188 ; case 1 main__57: ; # Increment LED's (Command = 1001 bbbb): ; line_number = 190 ; ledx := command_last & 0xf movlw 15 andwf command_last,w movwf main__ledx ; line_number = 191 ; mask := 1 movlw 1 movwf main__mask ; line_number = 192 ; if ledx < 5 start movlw 5 subwf main__ledx,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code_size > 1 && false_code_size > 1 ; true_code_size=11 false_code_size=14 btfss __c___byte, __c___bit goto main__38 ; line_number = 201 ; ledx := ledx - 5 movlw 251 addwf main__ledx,f ; line_number = 202 ; while ledx != 0 start main__32: ; Left minus Right movf main__ledx,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size=0 && false.size>1 ; bit_code_emit_helper1: body_code.size=4 true_test=false body_code.delay=0 (non-uniform delay) btfsc __z___byte, __z___bit goto main__33 ; line_number = 203 ; mask := mask << 1 ; Assignment of variable to self (no code needed) rlf main__mask,f bcf main__mask, 0 ; line_number = 204 ; ledx := ledx - 1 decf main__ledx,f goto main__32 main__33: ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:00=>00 code:XX=>XX) ; line_number = 202 ; while ledx != 0 done ; line_number = 205 ; leds_mask_high := leds_mask_high + mask movf main__mask,w addwf leds_mask_high,f goto main__39 main__38: ; line_number = 193 ; while ledx != 0 start main__34: ; Left minus Right movf main__ledx,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size=0 && false.size>1 ; bit_code_emit_helper1: body_code.size=4 true_test=false body_code.delay=0 (non-uniform delay) btfsc __z___byte, __z___bit goto main__35 ; line_number = 194 ; mask := mask << 1 ; Assignment of variable to self (no code needed) rlf main__mask,f bcf main__mask, 0 ; line_number = 195 ; ledx := ledx - 1 decf main__ledx,f goto main__34 main__35: ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:00=>00 code:XX=>XX) ; line_number = 193 ; while ledx != 0 done ; line_number = 196 ; leds_mask_low := leds_mask_low + mask movf main__mask,w addwf leds_mask_low,f ; line_number = 197 ; if leds_mask_low@5 start main__select__36___byte equ leds_mask_low main__select__36___bit equ 5 ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code.size = 0 && false_code.size > 1 ; bit_code_emit_helper1: body_code.size=3 true_test=true body_code.delay=0 (non-uniform delay) btfss main__select__36___byte, main__select__36___bit goto main__37 ; line_number = 198 ; leds_mask_low := leds_mask_low & 0x1f movlw 31 andwf leds_mask_low,f ; line_number = 199 ; leds_mask_high := leds_mask_high + 1 incf leds_mask_high,f ; Recombine size1 = 0 || size2 = 0 main__37: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=main__select__36 (data:00=>00 code:XX=>XX) ; line_number = 197 ; if leds_mask_low@5 done main__39: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__c (data:00=>00 code:XX=>XX) ; line_number = 192 ; if ledx < 5 done ; line_number = 206 ; leds_mask_high := leds_mask_high & 0x1f movlw 31 andwf leds_mask_high,f goto main__62 ; line_number = 207 ; case 2 main__58: ; # Decrement LED's (Command = 1010 bbbb): ; line_number = 209 ; ledx := command_last & 0xf movlw 15 andwf command_last,w movwf main__ledx ; line_number = 210 ; mask := 1 movlw 1 movwf main__mask ; line_number = 211 ; if ledx < 5 start movlw 5 subwf main__ledx,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code_size > 1 && false_code_size > 1 ; true_code_size=11 false_code_size=14 btfss __c___byte, __c___bit goto main__46 ; line_number = 220 ; ledx := ledx - 5 movlw 251 addwf main__ledx,f ; line_number = 221 ; while ledx != 0 start main__40: ; Left minus Right movf main__ledx,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size=0 && false.size>1 ; bit_code_emit_helper1: body_code.size=4 true_test=false body_code.delay=0 (non-uniform delay) btfsc __z___byte, __z___bit goto main__41 ; line_number = 222 ; mask := mask << 1 ; Assignment of variable to self (no code needed) rlf main__mask,f bcf main__mask, 0 ; line_number = 223 ; ledx := ledx -1 decf main__ledx,f goto main__40 main__41: ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:00=>00 code:XX=>XX) ; line_number = 221 ; while ledx != 0 done ; line_number = 224 ; leds_mask_high := leds_mask_high - mask movf main__mask,w subwf leds_mask_high,f goto main__47 main__46: ; line_number = 212 ; while ledx != 0 start main__42: ; Left minus Right movf main__ledx,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size=0 && false.size>1 ; bit_code_emit_helper1: body_code.size=4 true_test=false body_code.delay=0 (non-uniform delay) btfsc __z___byte, __z___bit goto main__43 ; line_number = 213 ; mask := mask << 1 ; Assignment of variable to self (no code needed) rlf main__mask,f bcf main__mask, 0 ; line_number = 214 ; ledx := ledx -1 decf main__ledx,f goto main__42 main__43: ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:00=>00 code:XX=>XX) ; line_number = 212 ; while ledx != 0 done ; line_number = 215 ; leds_mask_low := leds_mask_low - mask movf main__mask,w subwf leds_mask_low,f ; line_number = 216 ; if leds_mask_low@5 start main__select__44___byte equ leds_mask_low main__select__44___bit equ 5 ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code.size = 0 && false_code.size > 1 ; bit_code_emit_helper1: body_code.size=3 true_test=true body_code.delay=0 (non-uniform delay) btfss main__select__44___byte, main__select__44___bit goto main__45 ; line_number = 217 ; leds_mask_low := leds_mask_low & 0x1f movlw 31 andwf leds_mask_low,f ; line_number = 218 ; leds_mask_high := leds_mask_high - 1 decf leds_mask_high,f ; Recombine size1 = 0 || size2 = 0 main__45: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=main__select__44 (data:00=>00 code:XX=>XX) ; line_number = 216 ; if leds_mask_low@5 done main__47: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__c (data:00=>00 code:XX=>XX) ; line_number = 211 ; if ledx < 5 done ; line_number = 225 ; leds_mask_high := leds_mask_high & 0x1f movlw 31 andwf leds_mask_high,f goto main__62 ; line_number = 226 ; case 3 main__59: ; # Power Level Set (Command = 1011 llll): ; line_number = 228 ; ledx := command_last & 0xf movlw 15 andwf command_last,w movwf main__ledx ; line_number = 229 ; mask := 0 movlw 0 movwf main__mask ; line_number = 230 ; if ledx <= 5 start movlw 5 subwf main__ledx,w btfsc __z___byte, __z___bit bcf __c___byte, __c___bit ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code_size > 1 && false_code_size > 1 ; true_code_size=15 false_code_size=12 btfss __c___byte, __c___bit goto main__54 ; line_number = 237 ; ledx := ledx - 5 movlw 251 addwf main__ledx,f ; line_number = 238 ; while ledx != 0 start main__48: ; Left minus Right movf main__ledx,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size=0 && false.size>1 ; bit_code_emit_helper1: body_code.size=6 true_test=false body_code.delay=0 (non-uniform delay) btfsc __z___byte, __z___bit goto main__50 ; line_number = 239 ; mask := mask << 1 | 1 main__49 equ globals___0+38 rlf main__mask,w andlw 254 iorlw 1 movwf main__mask ; line_number = 240 ; ledx := ledx - 1 decf main__ledx,f goto main__48 main__50: ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:00=>00 code:XX=>XX) ; line_number = 238 ; while ledx != 0 done ; line_number = 241 ; leds_mask_low := 0x1f movlw 31 movwf leds_mask_low ; line_number = 242 ; leds_mask_high := mask & 0x1f movlw 31 andwf main__mask,w goto main__55 main__54: ; line_number = 231 ; while ledx != 0 start main__51: ; Left minus Right movf main__ledx,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size=0 && false.size>1 ; bit_code_emit_helper1: body_code.size=6 true_test=false body_code.delay=0 (non-uniform delay) btfsc __z___byte, __z___bit goto main__53 ; line_number = 232 ; mask := (mask << 1) | 1 main__52 equ globals___0+38 rlf main__mask,w andlw 254 iorlw 1 movwf main__mask ; line_number = 233 ; ledx := ledx - 1 decf main__ledx,f goto main__51 main__53: ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:00=>00 code:XX=>XX) ; line_number = 231 ; while ledx != 0 done ; line_number = 234 ; leds_mask_low := mask movf main__mask,w movwf leds_mask_low ; line_number = 235 ; leds_mask_high := 0 movlw 0 main__55: ; code.delay=4294967295 back_code.delay=4294967295 movwf leds_mask_high ; <=bit_code_emit@symbol; sym=__c (data:00=>00 code:XX=>XX) ; line_number = 230 ; if ledx <= 5 done main__62: ; switch end:(data:00=>?? code:XX=>XX) ; line_number = 159 ; switch (command_last >> 4) & 3 done goto main__94 ; line_number = 243 ; case 3 main__91: ; # (Command = 11xx xxxx): ; line_number = 245 ; switch (command_last >> 3) & 7 start movlw main__85>>8 movwf __pclath main__86 equ globals___0+38 rrf command_last,w movwf main__86 rrf main__86,f rrf main__86,w andlw 7 addlw main__85 movwf __pcl ; page_group 8 main__85: goto main__87 goto main__87 goto main__87 goto main__87 goto main__87 goto main__83 goto main__87 goto main__84 ; line_number = 246 ; case 5 main__83: ; # (Comamnd = 1110 1xxx): ; line_number = 248 ; switch command_last & 7 start ; line_number = 249 ; case_maximum 7 movlw main__70>>8 movwf __pclath movlw 7 andwf command_last,w addlw main__70 movwf __pcl ; page_group 8 main__70: goto main__71 goto main__71 goto main__71 goto main__71 goto main__67 goto main__68 goto main__69 goto main__71 ; line_number = 250 ; case 4 main__67: ; # Set New Baud Rate (Command = 1101 1101): ; line_number = 252 ; temp := byte_get() call byte_get movwf main__temp ; line_number = 253 ; if (temp >> 4) & 0xf = temp & 0xf start ; Left minus Right main__64 equ globals___0+38 main__65 equ globals___0+39 swapf main__temp,w andlw 15 movwf main__64 movlw 15 andwf main__temp,w subwf main__64,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code.size = 0 && false_code.size > 1 ; bit_code_emit_helper1: body_code.size=24 true_test=true body_code.delay=0 (non-uniform delay) btfss __z___byte, __z___bit goto main__66 ; # The rates match: ; line_number = 255 ; temp := temp & 7 movlw 7 andwf main__temp,f ; # Save the previous baud rate: ; line_number = 257 ; previous_spbrg := _spbrg movf _spbrg,w movwf main__previous_spbrg ; line_number = 258 ; previous_spbrgh := _spbrgh movf _spbrgh,w movwf main__previous_spbrgh ; # Set the new baud rate: ; line_number = 260 ; _spbrg := baud_rate_low(temp) movf main__temp,w call baud_rate_low movwf _spbrg ; line_number = 261 ; _spbrgh := baud_rate_high(temp) movf main__temp,w call baud_rate_high movwf _spbrgh ; # Send the response byte: ; line_number = 263 ; call byte_put(0x55) movlw 85 call byte_put ; # Get the final command byte: ; line_number = 265 ; temp := byte_get() call byte_get movwf main__temp ; line_number = 266 ; if temp != 0x55 start ; Left minus Right movlw 171 addwf main__temp,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size=0 && false.size>1 ; bit_code_emit_helper1: body_code.size=4 true_test=false body_code.delay=0 (non-uniform delay) btfsc __z___byte, __z___bit goto main__63 ; # Something is wrong; restore previous baud rate: ; line_number = 268 ; _spbrg := previous_spbrg movf main__previous_spbrg,w movwf _spbrg ; line_number = 269 ; _spbrgh := previous_spbrgh movf main__previous_spbrgh,w movwf _spbrgh main__63: ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:00=>00 code:XX=>XX) ; line_number = 266 ; if temp != 0x55 done ; Recombine size1 = 0 || size2 = 0 main__66: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:00=>00 code:XX=>XX) ; line_number = 253 ; if (temp >> 4) & 0xf = temp & 0xf done goto main__71 ; line_number = 270 ; case 5 main__68: ; # Read Current Baud Rate (Command = 1101 1101): ; line_number = 272 ; call byte_put(baud_rate_current) movf baud_rate_current,w call byte_put goto main__71 ; line_number = 273 ; case 6 main__69: ; # Read Available Baud Rates (Command = 1101 1110): ; line_number = 275 ; call byte_put(0xff) movlw 255 call byte_put main__71: ; switch end:(data:00=>00 code:XX=>XX) ; line_number = 248 ; switch command_last & 7 done goto main__87 ; line_number = 276 ; case 7 main__84: ; # Command = 1111 1xxx: ; line_number = 278 ; switch command_last & 7 start movlw main__81>>8 movwf __pclath movlw 7 andwf command_last,w addlw main__81 movwf __pcl ; page_group 8 main__81: goto main__73 goto main__74 goto main__75 goto main__76 goto main__77 goto main__78 goto main__79 goto main__80 ; line_number = 279 ; case 0 main__73: ; This case body wants this bit set bsf __rp0___byte, __rp0___bit ; # Clock Decrement (Command = 1111 1000): ; line_number = 281 ; _osctune := _osctune - _osccal_lsb decf _osctune,f goto main__82 ; line_number = 282 ; case 1 main__74: ; This case body wants this bit set bsf __rp0___byte, __rp0___bit ; # Clock Increment (Command = 1111 1001): ; line_number = 284 ; _osctune := _osctune + _osccal_lsb incf _osctune,f goto main__82 ; line_number = 285 ; case 2 main__75: ; This case body wants this bit set bsf __rp0___byte, __rp0___bit ; # Clock Read (Command = 1111 1010): ; line_number = 287 ; call byte_put(_osctune) movf _osctune,w bcf __rp0___byte, __rp0___bit call byte_put goto main__82 ; line_number = 288 ; case 3 main__76: ; # Clock Pulse (Command = 1111 1011): ; line_number = 290 ; call byte_put(0) movlw 0 call byte_put goto main__82 ; line_number = 291 ; case 4 main__77: ; # ID Next (Command = 1111 1100): ; line_number = 293 ; temp := 0 movlw 0 movwf main__temp ; line_number = 294 ; if index < id.size start movlw 47 subwf main__index,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size=0 && false.size>1 ; bit_code_emit_helper1: body_code.size=4 true_test=false body_code.delay=0 (non-uniform delay) btfsc __c___byte, __c___bit goto main__72 ; line_number = 295 ; temp := id[index] movf main__index,w call id movwf main__temp ; line_number = 296 ; index := index + 1 incf main__index,f main__72: ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__c (data:00=>00 code:XX=>XX) ; line_number = 294 ; if index < id.size done ; line_number = 297 ; call byte_put(temp) movf main__temp,w call byte_put goto main__82 ; line_number = 298 ; case 5 main__78: ; # ID Reset (Command = 1111 1101): ; line_number = 300 ; index := 0 movlw 0 movwf main__index goto main__82 ; line_number = 301 ; case 6 main__79: ; # Glitch Read (Command = 1111 1110): ; line_number = 303 ; call byte_put(glitch) movf main__glitch,w call byte_put ; line_number = 304 ; glitch := 0 movlw 0 movwf main__glitch goto main__82 ; line_number = 305 ; case 7 main__80: ; # Glitch (Command = 1111 1111): ; line_number = 307 ; if glitch != 0xff start ; Left minus Right incf main__glitch,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code.size=0 && false_code.size=1 btfss __z___byte, __z___bit ; line_number = 308 ; glitch := glitch + 1 incf main__glitch,f ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:00=>00 code:XX=>XX) ; line_number = 307 ; if glitch != 0xff done main__82: ; switch end:(data:00=>0? code:XX=>XX) ; line_number = 278 ; switch command_last & 7 done main__87: ; switch end:(data:00=>0? code:XX=>XX) ; line_number = 245 ; switch (command_last >> 3) & 7 done main__94: ; switch end:(data:00=>?? code:XX=>XX) ; line_number = 109 ; switch command_last >> 6 done ; line_number = 104 ; loop_forever wrap-up ; Need to adjust code banks to match front of loop bcf __rp0___byte, __rp0___bit bcf __rp1___byte, __rp1___bit goto main__4 ; line_number = 104 ; loop_forever done ; delay after procedure statements=non-uniform ; line_number = 311 ; procedure mask_to_bit mask_to_bit: ; Last argument is sitting in W; save into argument variable movwf mask_to_bit__mask ; delay=4294967295 ; line_number = 312 ; argument mask byte mask_to_bit__mask equ globals___0+33 ; line_number = 313 ; returns byte ; line_number = 315 ; local bit byte mask_to_bit__bit equ globals___0+32 ; before procedure statements delay=non-uniform, bit states=(data:00=>00 code:XX=>XX) ; line_number = 317 ; if mask = 0xff start ; Left minus Right incf mask_to_bit__mask,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: True.size=1 False.size=0 btfsc __z___byte, __z___bit ; line_number = 318 ; return 7 start ; line_number = 318 retlw 7 ; line_number = 318 ; return 7 done ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:XX=>XX code:XX=>XX) ; line_number = 317 ; if mask = 0xff done ; line_number = 319 ; bit := 0 movlw 0 movwf mask_to_bit__bit ; line_number = 320 ; mask := mask | 0x80 bsf mask_to_bit__mask, 7 ; line_number = 321 ; while !(mask@0) start mask_to_bit__1: mask_to_bit__select__2___byte equ mask_to_bit__mask mask_to_bit__select__2___bit equ 0 ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size=0 && false.size>1 ; bit_code_emit_helper1: body_code.size=4 true_test=false body_code.delay=0 (non-uniform delay) btfsc mask_to_bit__select__2___byte, mask_to_bit__select__2___bit goto mask_to_bit__3 ; line_number = 322 ; mask := mask >> 1 ; Assignment of variable to self (no code needed) rrf mask_to_bit__mask,f bcf mask_to_bit__mask, 7 ; line_number = 323 ; bit := bit + 1 incf mask_to_bit__bit,f goto mask_to_bit__1 mask_to_bit__3: ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=mask_to_bit__select__2 (data:00=>00 code:XX=>XX) ; line_number = 321 ; while !(mask@0) done ; line_number = 324 ; return bit start ; line_number = 324 movf mask_to_bit__bit,w return ; line_number = 324 ; return bit done ; delay after procedure statements=non-uniform ; line_number = 327 ; procedure delay delay: ; arguments_none ; line_number = 329 ; returns_nothing ; # This procedure delays 1/3 of a bit. ; line_number = 333 ; local blink byte delay__blink equ globals___0+34 ; line_number = 334 ; local high byte delay__high equ globals___0+35 ; line_number = 335 ; local low byte delay__low equ globals___0+36 ; line_number = 336 ; local state_byte byte delay__state_byte equ globals___0+37 ; # This procedure is called 7200 times a second. We want to ; # slow the fastest blink rate down to something more manageable, ; # like 4 times a second. ; # Kick the dog: ; before procedure statements delay=non-uniform, bit states=(data:00=>00 code:XX=>XX) ; line_number = 343 ; watch_dog_reset done clrwdt ; # Only update LED's every the TMR0 wraps around: ; line_number = 346 ; if _t0if start ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code.size = 0 && false_code.size > 1 ; bit_code_emit_helper1: body_code.size=31 true_test=true body_code.delay=0 (non-uniform delay) btfss _t0if___byte, _t0if___bit goto delay__39 ; # Timer0 has overflowed: ; line_number = 348 ; _t0if := 0 bcf _t0if___byte, _t0if___bit ; # Slow the blink rate down: ; line_number = 351 ; low := low + 1 incf delay__low,f ; line_number = 352 ; if _z start ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code.size = 0 && false_code.size > 1 ; bit_code_emit_helper1: body_code.size=12 true_test=true body_code.delay=0 (non-uniform delay) btfss _z___byte, _z___bit goto delay__2 ; line_number = 353 ; high := high + 1 incf delay__high,f ; line_number = 354 ; if high > 2 start movlw 2 subwf delay__high,w btfsc __z___byte, __z___bit bcf __c___byte, __c___bit ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code.size = 0 && false_code.size > 1 ; bit_code_emit_helper1: body_code.size=3 true_test=true body_code.delay=0 (non-uniform delay) btfss __c___byte, __c___bit goto delay__1 ; line_number = 355 ; high := 0 movlw 0 movwf delay__high ; line_number = 356 ; blink := blink + 1 incf delay__blink,f ; Recombine size1 = 0 || size2 = 0 delay__1: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__c (data:00=>00 code:XX=>XX) ; line_number = 354 ; if high > 2 done ; # We never let the blink mask go to all zeros because the way ; # we indicate that an LED is to stay on always is that we set ; # its blink mask to all one's. If the blink variable ever goes ; # to all zeros, there would be a small glitch for LED's that ; # are supposed to be always on. Hence we skip over a value of 0. ; line_number = 363 ; if _z start ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: True.size=1 False.size=0 btfsc _z___byte, _z___bit ; line_number = 364 ; blink := blink + 1 incf delay__blink,f ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=_z (data:00=>00 code:XX=>XX) ; line_number = 363 ; if _z done ; Recombine size1 = 0 || size2 = 0 delay__2: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=_z (data:XX=>00 code:XX=>XX) ; line_number = 352 ; if _z done ; line_number = 366 ; switch row start movlw delay__37>>8 movwf __pclath movf row,w addlw delay__37 movwf __pcl ; page_group 4 ; Add 3 NOP's until start of new page nop nop nop delay__37: goto delay__33 goto delay__34 goto delay__35 goto delay__36 ; line_number = 367 ; case 0 delay__33: ; # Row 0: ; line_number = 369 ; if leds_mask_low@0 start delay__select__3___byte equ leds_mask_low delay__select__3___bit equ 0 ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size>1 false.size=1; no GOTO's btfss delay__select__3___byte, delay__select__3___bit goto delay__4 ; line_number = 370 ; if blink & blink_masks[0] != 0 start ; Left minus Right movf blink_masks,w andwf delay__blink,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_size=1 && false_size=1 ; SUBCASE: Double test; true, then false btfsc __z___byte, __z___bit ; line_number = 373 ; col0 := 0 bcf col0___byte, col0___bit btfss __z___byte, __z___bit ; line_number = 371 ; col0 := 1 bsf col0___byte, col0___bit ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:XX=>XX code:XX=>XX) ; line_number = 370 ; if blink & blink_masks[0] != 0 done ; Recombine code1_bit_states != code2_bit_states goto delay__5 delay__4: ; line_number = 375 ; col0 := 0 bcf col0___byte, col0___bit delay__5: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=delay__select__3 (data:00=>00 code:XX=>XX) ; line_number = 369 ; if leds_mask_low@0 done ; line_number = 377 ; if leds_mask_low@1 start delay__select__6___byte equ leds_mask_low delay__select__6___bit equ 1 ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size>1 false.size=1; no GOTO's btfss delay__select__6___byte, delay__select__6___bit goto delay__7 ; line_number = 378 ; if blink & blink_masks[1] != 0 start ; Left minus Right movf blink_masks+1,w andwf delay__blink,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_size=1 && false_size=1 ; SUBCASE: Double test; true, then false btfsc __z___byte, __z___bit ; line_number = 381 ; col1 := 0 bcf col1___byte, col1___bit btfss __z___byte, __z___bit ; line_number = 379 ; col1 := 1 bsf col1___byte, col1___bit ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:XX=>XX code:XX=>XX) ; line_number = 378 ; if blink & blink_masks[1] != 0 done ; Recombine code1_bit_states != code2_bit_states goto delay__8 delay__7: ; line_number = 383 ; col1 := 0 bcf col1___byte, col1___bit delay__8: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=delay__select__6 (data:00=>00 code:XX=>XX) ; line_number = 377 ; if leds_mask_low@1 done ; line_number = 385 ; if leds_mask_low@2 start delay__select__9___byte equ leds_mask_low delay__select__9___bit equ 2 ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size>1 false.size=1; no GOTO's btfss delay__select__9___byte, delay__select__9___bit goto delay__10 ; line_number = 386 ; if blink & blink_masks[2] != 0 start ; Left minus Right movf blink_masks+2,w andwf delay__blink,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_size=1 && false_size=1 ; SUBCASE: Double test; true, then false btfsc __z___byte, __z___bit ; line_number = 389 ; col2 := 0 bcf col2___byte, col2___bit btfss __z___byte, __z___bit ; line_number = 387 ; col2 := 1 bsf col2___byte, col2___bit ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:XX=>XX code:XX=>XX) ; line_number = 386 ; if blink & blink_masks[2] != 0 done ; Recombine code1_bit_states != code2_bit_states goto delay__11 delay__10: ; line_number = 391 ; col2 := 0 bcf col2___byte, col2___bit delay__11: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=delay__select__9 (data:00=>00 code:XX=>XX) ; line_number = 385 ; if leds_mask_low@2 done ; line_number = 393 ; if leds_mask_low@3 start delay__select__12___byte equ leds_mask_low delay__select__12___bit equ 3 ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size>1 false.size=1; no GOTO's btfss delay__select__12___byte, delay__select__12___bit goto delay__13 ; line_number = 394 ; if blink & blink_masks[3] != 0 start ; Left minus Right movf blink_masks+3,w andwf delay__blink,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_size=1 && false_size=1 ; SUBCASE: Double test; true, then false btfsc __z___byte, __z___bit ; line_number = 397 ; col3 := 0 bcf col3___byte, col3___bit btfss __z___byte, __z___bit ; line_number = 395 ; col3 := 1 bsf col3___byte, col3___bit ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:XX=>XX code:XX=>XX) ; line_number = 394 ; if blink & blink_masks[3] != 0 done ; Recombine code1_bit_states != code2_bit_states goto delay__14 delay__13: ; line_number = 399 ; col3 := 0 bcf col3___byte, col3___bit delay__14: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=delay__select__12 (data:00=>00 code:XX=>XX) ; line_number = 393 ; if leds_mask_low@3 done ; # Activate the row: ; line_number = 402 ; row0 := 0 bcf row0___byte, row0___bit goto delay__38 ; line_number = 403 ; case 1 delay__34: ; # Row 1: ; line_number = 405 ; row0 := 1 bsf row0___byte, row0___bit ; line_number = 406 ; if leds_mask_low@4 start delay__select__15___byte equ leds_mask_low delay__select__15___bit equ 4 ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size>1 false.size=1; no GOTO's btfss delay__select__15___byte, delay__select__15___bit goto delay__16 ; line_number = 407 ; if blink & blink_masks[4] != 0 start ; Left minus Right movf blink_masks+4,w andwf delay__blink,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_size=1 && false_size=1 ; SUBCASE: Double test; true, then false btfsc __z___byte, __z___bit ; line_number = 410 ; col0 := 0 bcf col0___byte, col0___bit btfss __z___byte, __z___bit ; line_number = 408 ; col0 := 1 bsf col0___byte, col0___bit ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:XX=>XX code:XX=>XX) ; line_number = 407 ; if blink & blink_masks[4] != 0 done ; Recombine code1_bit_states != code2_bit_states goto delay__17 delay__16: ; line_number = 412 ; col0 := 0 bcf col0___byte, col0___bit delay__17: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=delay__select__15 (data:XX=>00 code:XX=>XX) ; line_number = 406 ; if leds_mask_low@4 done ; line_number = 414 ; if leds_mask_high@0 start delay__select__18___byte equ leds_mask_high delay__select__18___bit equ 0 ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size>1 false.size=1; no GOTO's btfss delay__select__18___byte, delay__select__18___bit goto delay__19 ; line_number = 415 ; if blink & blink_masks[5] != 0 start ; Left minus Right movf blink_masks+5,w andwf delay__blink,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_size=1 && false_size=1 ; SUBCASE: Double test; true, then false btfsc __z___byte, __z___bit ; line_number = 418 ; col1 := 0 bcf col1___byte, col1___bit btfss __z___byte, __z___bit ; line_number = 416 ; col1 := 1 bsf col1___byte, col1___bit ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:XX=>XX code:XX=>XX) ; line_number = 415 ; if blink & blink_masks[5] != 0 done ; Recombine code1_bit_states != code2_bit_states goto delay__20 delay__19: ; line_number = 420 ; col1 := 0 bcf col1___byte, col1___bit delay__20: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=delay__select__18 (data:XX=>00 code:XX=>XX) ; line_number = 414 ; if leds_mask_high@0 done ; line_number = 422 ; if leds_mask_high@1 start delay__select__21___byte equ leds_mask_high delay__select__21___bit equ 1 ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size>1 false.size=1; no GOTO's btfss delay__select__21___byte, delay__select__21___bit goto delay__22 ; line_number = 423 ; if blink & blink_masks[6] != 0 start ; Left minus Right movf blink_masks+6,w andwf delay__blink,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_size=1 && false_size=1 ; SUBCASE: Double test; true, then false btfsc __z___byte, __z___bit ; line_number = 426 ; col2 := 0 bcf col2___byte, col2___bit btfss __z___byte, __z___bit ; line_number = 424 ; col2 := 1 bsf col2___byte, col2___bit ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:XX=>XX code:XX=>XX) ; line_number = 423 ; if blink & blink_masks[6] != 0 done ; Recombine code1_bit_states != code2_bit_states goto delay__23 delay__22: ; line_number = 428 ; col2 := 0 bcf col2___byte, col2___bit delay__23: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=delay__select__21 (data:XX=>00 code:XX=>XX) ; line_number = 422 ; if leds_mask_high@1 done ; line_number = 430 ; if leds_mask_high@2 start delay__select__24___byte equ leds_mask_high delay__select__24___bit equ 2 ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size>1 false.size=1; no GOTO's btfss delay__select__24___byte, delay__select__24___bit goto delay__25 ; line_number = 431 ; if blink & blink_masks[7] != 0 start ; Left minus Right movf blink_masks+7,w andwf delay__blink,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_size=1 && false_size=1 ; SUBCASE: Double test; true, then false btfsc __z___byte, __z___bit ; line_number = 434 ; col3 := 0 bcf col3___byte, col3___bit btfss __z___byte, __z___bit ; line_number = 432 ; col3 := 1 bsf col3___byte, col3___bit ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:XX=>XX code:XX=>XX) ; line_number = 431 ; if blink & blink_masks[7] != 0 done ; Recombine code1_bit_states != code2_bit_states goto delay__26 delay__25: ; line_number = 436 ; col3 := 0 bcf col3___byte, col3___bit delay__26: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=delay__select__24 (data:XX=>00 code:XX=>XX) ; line_number = 430 ; if leds_mask_high@2 done ; # Activate the row: ; line_number = 439 ; row1 := 0 bcf row1___byte, row1___bit goto delay__38 ; line_number = 440 ; case 2 delay__35: ; # Row 1: ; line_number = 442 ; row1 := 1 bsf row1___byte, row1___bit ; line_number = 443 ; if leds_mask_high@3 start delay__select__27___byte equ leds_mask_high delay__select__27___bit equ 3 ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size>1 false.size=1; no GOTO's btfss delay__select__27___byte, delay__select__27___bit goto delay__28 ; line_number = 444 ; if blink & blink_masks[8] != 0 start ; Left minus Right movf blink_masks+8,w andwf delay__blink,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_size=1 && false_size=1 ; SUBCASE: Double test; true, then false btfsc __z___byte, __z___bit ; line_number = 447 ; col0 := 0 bcf col0___byte, col0___bit btfss __z___byte, __z___bit ; line_number = 445 ; col0 := 1 bsf col0___byte, col0___bit ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:XX=>XX code:XX=>XX) ; line_number = 444 ; if blink & blink_masks[8] != 0 done ; Recombine code1_bit_states != code2_bit_states goto delay__29 delay__28: ; line_number = 449 ; col0 := 0 bcf col0___byte, col0___bit delay__29: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=delay__select__27 (data:XX=>00 code:XX=>XX) ; line_number = 443 ; if leds_mask_high@3 done ; line_number = 451 ; if leds_mask_high@4 start delay__select__30___byte equ leds_mask_high delay__select__30___bit equ 4 ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size>1 false.size=1; no GOTO's btfss delay__select__30___byte, delay__select__30___bit goto delay__31 ; line_number = 452 ; if blink & blink_masks[9] != 0 start ; Left minus Right movf blink_masks+9,w andwf delay__blink,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_size=1 && false_size=1 ; SUBCASE: Double test; true, then false btfsc __z___byte, __z___bit ; line_number = 455 ; col1 := 0 bcf col1___byte, col1___bit btfss __z___byte, __z___bit ; line_number = 453 ; col1 := 1 bsf col1___byte, col1___bit ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__z (data:XX=>XX code:XX=>XX) ; line_number = 452 ; if blink & blink_masks[9] != 0 done ; Recombine code1_bit_states != code2_bit_states goto delay__32 delay__31: ; line_number = 457 ; col1 := 0 bcf col1___byte, col1___bit delay__32: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=delay__select__30 (data:XX=>00 code:XX=>XX) ; line_number = 451 ; if leds_mask_high@4 done ; # Activate the row: ; line_number = 460 ; row2 := 0 bcf row2___byte, row2___bit goto delay__38 ; line_number = 461 ; case 3 delay__36: ; # Row 3: ; line_number = 463 ; row2 := 1 bsf row2___byte, row2___bit delay__38: ; switch end:(data:XX=>00 code:XX=>XX) ; line_number = 366 ; switch row done ; line_number = 464 ; row := (row + 1) & 3 incf row,w andlw 3 movwf row ; Recombine size1 = 0 || size2 = 0 delay__39: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=_t0if (data:00=>00 code:XX=>XX) ; line_number = 346 ; if _t0if done ; # Output debug information: ; line_number = 467 ; if in_byte_get start ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code.size = 0 && false_code.size > 1 ; bit_code_emit_helper1: body_code.size=38 true_test=true body_code.delay=0 (non-uniform delay) btfss in_byte_get___byte, in_byte_get___bit goto delay__45 ; line_number = 468 ; if debug_mode start ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code.size = 0 && false_code.size > 1 ; bit_code_emit_helper1: body_code.size=36 true_test=true body_code.delay=0 (non-uniform delay) btfss debug_mode___byte, debug_mode___bit goto delay__44 ; line_number = 469 ; if _trmt start ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code.size = 0 && false_code.size > 1 ; bit_code_emit_helper1: body_code.size=34 true_test=true body_code.delay=0 (non-uniform delay) btfss _trmt___byte, _trmt___bit goto delay__43 ; # The transmit buffer is available: ; line_number = 471 ; if state_index >= states_size2 start movlw 12 subwf state_index,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_code_size > 1 && false_code_size > 1 ; true_code_size=4 false_code_size=22 btfss __c___byte, __c___bit goto delay__41 ; # Output carriage return: ; line_number = 473 ; state_byte := '\r\' movlw 13 movwf delay__state_byte ; line_number = 474 ; state_index := 0 movlw 0 movwf state_index goto delay__42 delay__41: ; # Output a hex byte: ; line_number = 477 ; state_byte := states[state_index >> 1] delay__40 equ globals___0+40 rrf state_index,w andlw 127 addlw states movwf __fsr movf __indf,w movwf delay__state_byte ; line_number = 478 ; if state_index & 1 = 0 start ; Left minus Right movlw 1 andwf state_index,w ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: True.size=1 False.size=0 btfsc __z___byte, __z___bit ; line_number = 479 ; state_byte := state_byte >> 4 ; Assignment of variable to self (no code needed) swapf delay__state_byte,f ; code.delay=4294967295 back_code.delay=4294967295 movlw 15 andwf delay__state_byte,f ; <=bit_code_emit@symbol; sym=__z (data:00=>00 code:XX=>XX) ; line_number = 478 ; if state_index & 1 = 0 done ; line_number = 482 ; if state_byte > 9 start movlw 9 subwf delay__state_byte,w btfsc __z___byte, __z___bit bcf __c___byte, __c___bit ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true_size=1 && false_size=1 ; SUBCASE: Double test; true, then false btfsc __c___byte, __c___bit ; line_number = 483 ; state_byte := state_byte + 'A' - 10 movlw 55 btfss __c___byte, __c___bit ; line_number = 485 ; state_byte := state_byte + '0' movlw 48 ; code.delay=4294967295 back_code.delay=4294967295 addwf delay__state_byte,f ; <=bit_code_emit@symbol; sym=__c (data:00=>00 code:XX=>XX) ; line_number = 482 ; if state_byte > 9 done ; line_number = 486 ; state_index := state_index + 1 incf state_index,f delay__42: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=__c (data:00=>00 code:XX=>XX) ; line_number = 471 ; if state_index >= states_size2 done ; line_number = 487 ; debug := 1 bsf debug___byte, debug___bit ; line_number = 488 ; _txreg := state_byte movf delay__state_byte,w movwf _txreg ; Recombine size1 = 0 || size2 = 0 delay__43: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=_trmt (data:00=>00 code:XX=>XX) ; line_number = 469 ; if _trmt done ; Recombine size1 = 0 || size2 = 0 delay__44: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=debug_mode (data:00=>00 code:XX=>XX) ; line_number = 468 ; if debug_mode done ; Recombine size1 = 0 || size2 = 0 delay__45: ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=in_byte_get (data:00=>00 code:XX=>XX) ; line_number = 467 ; if in_byte_get done ; delay after procedure statements=non-uniform ; Implied return retlw 0 ; line_number = 490 ; constant zero8 = "\0,0,0,0,0,0,0,0\" ; zero8 = '\0,0,0,0,0,0,0,0\' ; line_number = 491 ; constant module_name = "\6\LED10F" ; module_name = '\6\LED10F' ; line_number = 492 ; constant vendor_name = "\15\Gramlich&Benson" ; vendor_name = '\15\Gramlich&Benson' ; line_number = 494 ; string id = "\1,1,9,5,9,0,0,0\" ~ zero8 ~ zero8 ~ module_name ~ vendor_name start ; id = '\1,1,9,5,9,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,6\LED10F\15\Gramlich&Benson' id: ; Temporarily save index into FSR movwf __fsr ; Initialize PCLATH to point to this code page movlw id___base>>8 movwf __pclath ; Restore index from FSR movf __fsr,w addlw id___base ; Index to the correct return value movwf __pcl ; page_group 47 id___base: retlw 1 retlw 1 retlw 9 retlw 5 retlw 9 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 0 retlw 6 retlw 76 retlw 69 retlw 68 retlw 49 retlw 48 retlw 70 retlw 15 retlw 71 retlw 114 retlw 97 retlw 109 retlw 108 retlw 105 retlw 99 retlw 104 retlw 38 retlw 66 retlw 101 retlw 110 retlw 115 retlw 111 retlw 110 ; line_number = 494 ; string id = "\1,1,9,5,9,0,0,0\" ~ zero8 ~ zero8 ~ module_name ~ vendor_name start ; line_number = 495 ; string bit_to_mask = "\255,64,32,16,8,4,2,1\" start ; bit_to_mask = '\255\@ \16,8,4,2,1\' bit_to_mask: ; Temporarily save index into FSR movwf __fsr ; Initialize PCLATH to point to this code page movlw bit_to_mask___base>>8 movwf __pclath ; Restore index from FSR movf __fsr,w addlw bit_to_mask___base ; Index to the correct return value movwf __pcl ; page_group 8 bit_to_mask___base: retlw 255 retlw 64 retlw 32 retlw 16 retlw 8 retlw 4 retlw 2 retlw 1 ; line_number = 495 ; string bit_to_mask = "\255,64,32,16,8,4,2,1\" start ; Appending 4 delayed procedures to code bank 0 ; buffer = '_robobricks_pic16f688' ; line_number = 17 ; procedure byte_get byte_get: ; arguments_none ; line_number = 19 ; returns byte ; # This procedure will return the next byte from the UART. ; # It continuously calls delay() while it is waiting. ; before procedure statements delay=non-uniform, bit states=(data:00=>00 code:XX=>XX) ; line_number = 24 ; while !_rcif start byte_get__1: ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size=0 && false.size>1 ; bit_code_emit_helper1: body_code.size=4 true_test=false body_code.delay=0 (non-uniform delay) btfsc _rcif___byte, _rcif___bit goto byte_get__2 ; line_number = 25 ; in_byte_get := 1 bsf in_byte_get___byte, in_byte_get___bit ; line_number = 26 ; call delay() call delay ; line_number = 27 ; in_byte_get := 0 bcf in_byte_get___byte, in_byte_get___bit goto byte_get__1 byte_get__2: ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=_rcif (data:00=>00 code:XX=>XX) ; line_number = 24 ; while !_rcif done ; line_number = 28 ; command_previous := command_last movf command_last,w movwf command_previous ; line_number = 29 ; _rcif := 0 bcf _rcif___byte, _rcif___bit ; line_number = 30 ; return _rcreg start ; line_number = 30 movf _rcreg,w return ; line_number = 30 ; return _rcreg done ; delay after procedure statements=non-uniform ; line_number = 33 ; procedure byte_put byte_put: ; Last argument is sitting in W; save into argument variable movwf byte_put__value ; delay=4294967295 ; line_number = 34 ; argument value byte byte_put__value equ globals___0 ; line_number = 35 ; returns_nothing ; # This procedure will output {value} to the UART. If the UART is ; # already busy transmitting a character, the {delay} procedure is ; # repeatably called until {value} can be sent. ; before procedure statements delay=non-uniform, bit states=(data:00=>00 code:XX=>XX) ; line_number = 41 ; while !_trmt start byte_put__1: ; (after recombine) true_delay=non-uniform, false_delay=non-uniform ; CASE: true.size=0 && false.size>1 ; bit_code_emit_helper1: body_code.size=2 true_test=false body_code.delay=0 (non-uniform delay) btfsc _trmt___byte, _trmt___bit goto byte_put__2 ; line_number = 42 ; call delay() call delay goto byte_put__1 byte_put__2: ; Recombine size1 = 0 || size2 = 0 ; code.delay=4294967295 back_code.delay=4294967295 ; <=bit_code_emit@symbol; sym=_trmt (data:00=>00 code:XX=>XX) ; line_number = 41 ; while !_trmt done ; line_number = 43 ; debug := 0 bcf debug___byte, debug___bit ; line_number = 44 ; sent_previous := sent_last movf sent_last,w movwf sent_previous ; line_number = 45 ; sent_last := value movf byte_put__value,w movwf sent_last ; line_number = 46 ; _txreg := value movf byte_put__value,w movwf _txreg ; delay after procedure statements=non-uniform ; Implied return retlw 0 ; line_number = 49 ; procedure baud_rate_low baud_rate_low: ; Last argument is sitting in W; save into argument variable movwf baud_rate_low__baud_rate_index ; delay=4294967295 ; line_number = 50 ; argument baud_rate_index byte baud_rate_low__baud_rate_index equ globals___0+1 ; line_number = 51 ; returns byte ; #: This procedure will return the baud rate low byte for {baud_rate_index}. ; before procedure statements delay=non-uniform, bit states=(data:00=>00 code:XX=>XX) ; line_number = 55 ; switch baud_rate_index start movlw baud_rate_low__9>>8 movwf __pclath movf baud_rate_low__baud_rate_index,w addlw baud_rate_low__9 movwf __pcl ; page_group 8 ; Add 2 NOP's until start of new page nop nop baud_rate_low__9: ; line_number = 57 ; return _eusart_2400_low start ; line_number = 57 retlw 64 ; line_number = 57 ; return _eusart_2400_low done ; line_number = 59 ; return _eusart_4800_low start ; line_number = 59 retlw 159 ; line_number = 59 ; return _eusart_4800_low done ; line_number = 61 ; return _eusart_9600_low start ; line_number = 61 retlw 207 ; line_number = 61 ; return _eusart_9600_low done ; line_number = 63 ; return _eusart_19200_low start ; line_number = 63 retlw 103 ; line_number = 63 ; return _eusart_19200_low done ; line_number = 65 ; return _eusart_38400_low start ; line_number = 65 retlw 51 ; line_number = 65 ; return _eusart_38400_low done ; line_number = 67 ; return _eusart_57600_low start ; line_number = 67 retlw 33 ; line_number = 67 ; return _eusart_57600_low done ; line_number = 69 ; return _eusart_115200_low start ; line_number = 69 retlw 16 ; line_number = 69 ; return _eusart_115200_low done ; line_number = 71 ; return _eusart_203400_low start ; line_number = 71 retlw 8 ; line_number = 71 ; return _eusart_203400_low done baud_rate_low__10: ; switch end:(data:00=>00 code:XX=>XX) ; line_number = 55 ; switch baud_rate_index done ; delay after procedure statements=non-uniform ; Exiting procedure with no return(s); fail with infinite loop baud_rate_low__11: goto baud_rate_low__11 ; line_number = 74 ; procedure baud_rate_high baud_rate_high: ; Last argument is sitting in W; save into argument variable movwf baud_rate_high__baud_rate_index ; delay=4294967295 ; line_number = 75 ; argument baud_rate_index byte baud_rate_high__baud_rate_index equ globals___0+2 ; line_number = 76 ; returns byte ; # This procedure will return the baud rate high byte for ; # {baud_rate_index}. ; before procedure statements delay=non-uniform, bit states=(data:00=>00 code:XX=>XX) ; line_number = 81 ; switch baud_rate_index start movlw baud_rate_high__9>>8 movwf __pclath movf baud_rate_high__baud_rate_index,w addlw baud_rate_high__9 movwf __pcl ; page_group 8 baud_rate_high__9: ; line_number = 83 ; return _eusart_2400_high start ; line_number = 83 retlw 3 ; line_number = 83 ; return _eusart_2400_high done ; line_number = 85 ; return _eusart_4800_high start ; line_number = 85 retlw 1 ; line_number = 85 ; return _eusart_4800_high done ; line_number = 87 ; return _eusart_9600_high start ; line_number = 87 retlw 0 ; line_number = 87 ; return _eusart_9600_high done ; line_number = 89 ; return _eusart_19200_high start ; line_number = 89 retlw 0 ; line_number = 89 ; return _eusart_19200_high done ; line_number = 91 ; return _eusart_38400_high start ; line_number = 91 retlw 0 ; line_number = 91 ; return _eusart_38400_high done ; line_number = 93 ; return _eusart_57600_high start ; line_number = 93 retlw 0 ; line_number = 93 ; return _eusart_57600_high done ; line_number = 95 ; return _eusart_115200_high start ; line_number = 95 retlw 0 ; line_number = 95 ; return _eusart_115200_high done ; line_number = 97 ; return _eusart_203400_high start ; line_number = 97 retlw 0 ; line_number = 97 ; return _eusart_203400_high done baud_rate_high__10: ; switch end:(data:00=>00 code:XX=>XX) ; line_number = 81 ; switch baud_rate_index done ; delay after procedure statements=non-uniform ; Exiting procedure with no return(s); fail with infinite loop baud_rate_high__11: goto baud_rate_high__11 ; Configuration bits ; fill = 0x3000 ; fcmen = off (0x0) ; ieso = off (0x0) ; boden = off (0x0) ; cpd = off (0x80) ; cp = off (0x40) ; mclre = off (0x20) ; pwrte = off (0x10) ; wdte = off (0x0) ; fosc = int_no_clk (0x4) ; 12532 = 0x30f4 __config 12532 ; Define start addresses for data regions ; Region="shared___globals" Address=112" Size=16 Bytes=0 Bits=0 Available=16 ; Region="globals___0" Address=32" Size=80 Bytes=41 Bits=2 Available=38 ; Region="globals___1" Address=160" Size=80 Bytes=0 Bits=0 Available=80 ; Region="globals___2" Address=288" Size=80 Bytes=0 Bits=0 Available=80 ; Region="globals___3" Address=416" Size=80 Bytes=0 Bits=0 Available=80 end